Filter
Filter
BRAND GMBH + CO.KG
Bottle-top dispenser Dispensette® Organic Analog S
Accuracy:
0.5 ± R%
|
Autoclavable:
Yes
|
Division:
0.1 ml
|
Dosing volume:
0.5 ... 5 ml
|
Length suction tube:
240 mm
|
Max. dosing volume:
5 ml
|
Min. dosing volume:
0.5 ml
|
Precision:
0.1 ≤ VK%
|
Thread:
GL 45
|
With recirculation valve:
No
The bottle-top dispenser makes liquid dosing easy and secure.Analog volume displayQuickly adjustable dosing volumeVolume selection with interior scalloped trackSimple calibration adjustment with a supplied toolValve system - tight sealing without additional sealing ringsFilling valve, olive-shapedAutoclavable at 121 °CScope of supply:Bottletop dispensers Dispensette® S, DE-M marked, performance certificate, telescope filling tube, mounting tool, adapters made of PPYellow color code. Ideal for dispensing organic solvents, e.g., chlorinated and fluorinated hydrocarbons such as trichlorotrifluoroethane and methylene chloride, or concentrated acids such as HCl and HNO3 (not HF) as well as trifluoroacetic acid (TFA), tetrahydrofuran (THF) and peroxides.
€343.10*
Hirschmann Laborgeräte GmbH
Dispenser ceramus® variable
Accuracy max. vol. (± R%):
0.6
|
Grad. ml:
0.05
|
Precision max. vol. (≤ CV%):
0.2
|
Type:
Variable
|
Volume ml:
0.2 - 1.0
New dispenser technology from Hirschmann laboratory apparatus, with ceramic pistons. ceramus® are a high-precision, bottle-top dispenser range for almost all liquids.Environmentally-friendly, reagent-saving, recirculation valvesTough, ceramic pistonsSimple, self-locking volume selectionWhen not in use, pistons can be locked and delivery tubes capped to prevent loss of reagent.Fixed interval graduations give excellent reproducibility45mm screw neck and adapters supplied allow use with a variety of reservoir bottlesSmooth-action piston minimises operator fatigue during serial dispensingHigh-grade construction materials provide long operational lifeautoclavable at 121°CSupplied with: ceramus® complete with thread adapters A 45mm, 3 thread adapters (A 32, S 40 Merck bottles and A 38), 1 screw-coupled suction tube, 1 discharge tube unit complete, 1 spanner for valve, with individual serial number and single calibration report.
€416.00*
Hirschmann Laborgeräte GmbH
Dispensers, bottle-top, ceramus® classic
Accuracy:
0.6 ± R%
|
Division:
0.05 ml
|
Dosing volume:
0.2 ... 1 ml
|
Max. dosing volume:
1 ml
|
Min. dosing volume:
0.2 ml
|
Precision:
0.2 ≤ VK%
With ceramic pistons. High precision, bottle-top dispensers adjustable in fixed steps for the reproducible dispensing of liquids. Declaration of conformity acc. to DIN 12600. With patented, high-purity, alumino-ceramic pistons and highly polished, DURAN® glass cylinders, guaranteeing continual durability and precision.no surface abrasionno sticking due to plastic swellingno thermal expansion problemsRatchet adjustment mechanism prevents accidental adjustment of the set volume. When not in use the pistons can be locked and the delivery tubes capped to prevent loss of reagent. The glass cylinders are encased in plastic for added safety and have a window for viewing the contents. Autoclavable up to max. 121°C/2 bar.inlet and outlet valves are easily replacedfully supported delivery jet prevents 'side fling' of reagentscrew-fixed, inlet suction tubeHigh-grade materials (ECTFE, DURAN® glass, FEP) are used throughout.Discharge valves and valve seats consisting of high-purity aluminium oxide ceramicSupplied with: complete with thread A 32 mm, 3 thread adapters (A 28, A 45, S 40), 1 screw-coupled suction tube, 1 discharge tube unit, one spanner for valve, with individual serial number and Single Calibration Report.
€362.00*
Eppendorf SE
Multipette M4
Type:
Multipette® M4 incl. holder
On the Multipette®/Combitip system, volumes are dispensed using the positive displacement principle. The liquid is directly dispensed without an air cushion, ensuring the correct volume is always dispensed regardless of the density and viscosity of the liquid.In addition to serial dispensing, the Multipette is also the perfect instrument that is able to go beyond the limitations of a standard pipette.Light and ergonomicStress-free work via integrated step counter: dispensing procedures can be continued error-free after an interruption or distractionCentral Combitip ejector: fully emptied Combitip can be easily ejected with one hand using the operating leverStep counter: Displays the number of executed dispensing stepsOnly suitable with Eppendorf Combitips advancedCombitip sensor: Automatic Combitip recognition and volume displayApplications Repetitive Dispensing of volumes in long series such as plate filling or when aliquotingContamination-free dispensing of toxic, radioactive and or other hazardous liquidsPrecise and accurate dispensing of viscous solutions (e.g. glycerol) or liquids with high vapor pressure (e.g. ethanol)
€420.00*
45%
LLG Labware
Bottletop dispenser LLG-uniTOPDISPENS 2
Accuracy:
0.6 ± R%
|
Autoclavable:
Yes
|
Division:
0.05 ml
|
Dosing volume:
0.25 ... 2.5 ml
|
Max. dosing volume:
2.5 ml
|
Min. dosing volume:
0.25 ml
|
Precision:
0.2 ≤ VK%
|
Type:
LLG-uniTOPDISPENS 2
The combination of a springless PTFE valve and PTFE piston with chemically resistant ETP O-ring enables dispensing of both organic reagents as well as bases, thus, eliminating the need to buy different dispensers for different applications. The improved design of the uniTOPDISPENS 2 bottle top dispenser including a re-circulation valve allows a smooth, precise and reliable bubble free dispensing without any loss of reagent. The specially designed bottle adaptor which permits a 360° rotation of the unit, the easy volume setting as well as the flexible delivery nozzle underline the user friendliness of this bottletop dispenser. Available in six volume ranges.Springless PTFE valve, PTFE piston with chemically resistant ETP O-ring enables high chemical compatibility Glass cylinder from borosilicate glass 3.3Re-circulation valve enables easy priming and bubble free dispensingSmooth, reproducible and effortless dispensing360° rotation possible due to specially designed bottle adapterFlexible and adjustable delivery nozzle provides dispensing angle flexibility to the userSpecially designed volume adjustment knob for quick and easy volume settingThe telescopic extractable intake tube can be easily adjusted to varying bottle heightsNozzle cap reduces contact with air and prevents drying and dripping if the tip cover is attachedFive bottle adaptors included (28 mm, 32 mm, 37 mm, 40 mm and 45 mm). Standard thread: 30 mm.Fully autoclavable at 121 °C, 15 psi for 10 to 15 minIndividually calibrated in accordance with ISO 8655 standards and each unit is supplied with an individualcalibration certificateYou can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.3 years warranty
€147.00*
€266.80*
(44.9% saved)
BRAND GMBH + CO.KG
Accessories EASYCAL™
Type:
Micro-weighing container
For calibrating pipettes < 50 µl.Test tubesMicro-weighing container: The small cap opening and internal filter provides protection against evaporation. Incl. 10 filters and 3 cover capsFilter pack: 20 replacement filtersCover cap set: 3 spare caps
€26.80*
SOCOREX ISBA SA
Accessories for Bottle Top Dispensers Calibrex™
Description:
Dispenser holder for remote and tube aspiration
|
For:
Calibrex™ 520
€9.35*
Hamilton Central Europe SRL
Accessories for Diluters / Dispensers Microlab 500 series
For syringe volumes ml:
£ 1
|
Gauge:
18
|
Length mm:
900
|
Thread:
M6
|
Type:
Dispense tubing
Tubing assemblies. FEP. With M6 Fitting. Dispense tubing has tapered end.
€37.80*
Hamilton Central Europe SRL
Accessories for Diluters / Dispensers Microlab 500/600 series
For:
ML 500/600
|
Type:
Tube clip
€57.86*
Hamilton Central Europe SRL
Accessories for Diluters / Dispensers Microlab 600 series
Gauge:
12
|
Length mm:
1219
|
Type:
Fill tubing
|
Volume:
3,83 ml
Tubing assemblies FEP. Dispense tubing has tapered end.
€40.85*
BRAND GMBH + CO.KG
Accessories for Dispensette® S/S Organic/ S TA / seripettor® pro / Dispensette® III/ Burette Digital
Description:
Thread adapter, PP, outer thread GL 45, for bottle thread GL 35
|
For:
Dispensette®, seripettor®, Titrette® and QuikSip™
€2.32*
SOCOREX ISBA SA
Accessories for Microdispensers, Acura® manual 865
Description:
Reservoir with Luer connection, PP, 30 ml
€44.41*
Eppendorf SE
Accessories for Pipette tips, Eppendorf Combitips advanced®
Colour code:
red
|
Type:
advanced® Adapter
|
Volume ml:
25
€11.80*
BRAND GMBH + CO.KG
Accessories for repetitive pipette HandyStep® touch / HandyStep® touch S
Description:
Charging stand without universal AC adapter
€23.52*
BRAND GMBH + CO.KG
Adapter for seripettor® pro
Description:
Adapter for discharge tube
With ETFE seal.
€15.30*
Hirschmann Laborgeräte GmbH
Adapter with filling tube NS 12/21 for bottle-top dispensers and digital burettes
Description:
Adapter with filling tube NS 12/21
|
For:
opus® dispenser / opus® titration / ceramus® / ceramus® classic/ ceramus® HF / solarus®
With this adapter, the medium can be easily refilled using a funnel. It is not necessary to unscrew the base unit.
€225.00*
BRAND GMBH + CO.KG
Adapters for PD tips
Material:
PP
|
Sterile:
No
Adapters for 25ml and 50ml PD tips.
€23.43*
Hamilton Central Europe SRL
BFP Instrument Syringes, Microlab 600
Nominal capacity:
2500 µl
For use with Microlab 600 Diluter/Dispenser.
€144.48*
Hirschmann Laborgeräte GmbH
Bottle holder for bottle-top dispensers and digital burettes
Description:
Bottle holder
|
For:
opus® dispenser / opus® titration / ceramus® / ceramus® HF / ceramus® classic / EM dispenser / solarus®
Suitable for all bottles up to diam. approx. 75 mm to 120 mm.
€134.00*
VITLAB GmbH
Bottle Top Dispensers VITLAB® TA², valve spring Pt-Ir
Accuracy:
0,5 ± R%
|
Division:
0.2 ml
|
Dosing volume:
1.0 ... 10.0 ml
|
Max. dosing volume:
10.0 ml
|
Min. dosing volume:
1.0 ml
|
Precision:
0.1 ≤ VK%
|
Thread:
GL 45
|
With recirculation valve:
No
Developed for the demanding purity standards required in trace analysis. The release of metal trace is reduced to a level the low ppb range or even the ppt range. The parts that are in contact with media are made of various fluoroplastics (e.g. ETFE, FEP, PFA, PTFE), Al2O3-sapphire, platinum-iridium.For highly concentrated acids and bases, such as perchloric, sulphuric and nitric acidFast, easy and precise volume adjustment due to inner toothed bar and practical screwing mechanismPlatinum-iridium spring for dosing sodium hydroxide (up to a max. concentration of 30 %) or hydrogen fluoride (HF)DE-M markingOptionally with recirculation valveAlso available with DAkkS calibration certificate.Scope of supply:VITLAB® TA² dispenser (thread GL 45), 3 bottle adapters (GL 28/S 28 (ETFE), GL 32 (ETFE), S 40 (PTFE), telescopic filling tube, recirculation valve (optionally), mounting tool, quality certificate, instruction manual
€819.80*
VITLAB GmbH
Bottle Top Dispensers VITLAB® TA², valve spring tantalum
Accuracy:
0,5 ± R%
|
Division:
0.2 ml
|
Dosing volume:
1.0 ... 10.0 ml
|
Max. dosing volume:
10.0 ml
|
Min. dosing volume:
1.0 ml
|
Precision:
0.1 ≤ VK%
|
Thread:
GL 45
|
With recirculation valve:
No
Developed for the demanding purity standards required in trace analysis. The release of metal trace is reduced to a level the low ppb range or even the ppt range. The parts that are in contact with media are made of various fluoroplastics (e.g. ETFE, FEP, PFA, PTFE), Al2O3-sapphire, tantalum.For highly concentrated acids and bases, such as perchloric, sulphuric and nitric acidFast, easy and precise volume adjustment due to inner toothed bar and practical screwing mechanismTantalum spring is for dosing of hydrogen peroxide (H2O2)DE-M markingOptionally with recirculation valveAlso available with DAkkS calibration certificate.Scope of supply:VITLAB® TA² dispenser (thread GL 45), 3 bottle adapters (GL 28/S 28 (ETFE), GL 32 (ETFE), S 40 (PTFE), telescopic filling tube, recirculation valve (optionally), mounting tool, quality certificate, instruction manual
€819.80*
BRAND GMBH + CO.KG
Bottle-thread adapters, PP and ETFE
For bottles:
S 50
|
Material:
PP
|
Thread outside:
GL 45
For Dispensette®, Titrette®, seripettor® and QuikSip™. Adapters of ETFE offer higher chemical resistance.
€7.06*
BRAND GMBH + CO.KG
Bottle-top dispenser Dispensette® Analog S
Accuracy:
0.6 ± R%
|
Autoclavable:
Yes
|
Division:
0.02 ml
|
Dosing volume:
0.1 ... 1 ml
|
Length suction tube:
240 mm
|
Max. dosing volume:
1 ml
|
Min. dosing volume:
0.1 ml
|
Precision:
0.2 ≤ VK%
|
Thread:
GL 45
|
With recirculation valve:
No
The bottle-top dispenser makes liquid dosing easy and secure.Analog volume displayQuickly adjustable dosing volumeVolume selection with interior scalloped trackSimple calibration adjustment with a supplied toolValve system - tight sealing without additional sealing ringsFilling valve, olive-shapedAutoclavable at 121 °CScope of supply:Bottletop dispensers Dispensette® S, DE-M marked, performance certificate, telescope filling tube, mounting tool, adapters made of PPRed color code, for dispensing aggressive reagents, e.g. concentrated bases and acids such as H3PO4, H2SO4 (except as HCl, HNO3and HF), saline solutions and a variety of organic solvents.
€343.10*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Your watch lists
Loading...