Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013698
|
Max. Viscosity:
6000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.0673 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
15 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.0673 mNm
|
Type:
ROTAVISC lo-vi HELI Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
15 ... 6,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
For simple or demanding viscosity measurement of low-viscosity liquids in all areas of application, ranging from the laboratory to quality control. The motorized HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorScope of supply: Viscometers, stand HELISTAND, spindles SP set-1 and T-SP-SET, temperature sensor PT 100.8, protective bracketSpecificationsRotation speed:0.01 ... 200 rpmTemperature range:-100 ... 300 °CAccuracy:1 %Repeatability:0,2 %Stroke max.:142 mmDimensions stand (L x W x H):351 x 372 x 629 mmWeight:7.1 kgPower supply:100 ... 240 V, 50/60 HzProtection class acc. to DIN EN 60529:IP 40
Anzahl Messpositionen:
1
|
Accuracy:
0.01 ± s
|
Depth:
30 mm
|
Dimensions (WxDxH):
90 x 30 x 515 mm
|
Height:
515 mm
|
IP code:
IP 50
|
Manufacturer Article Number:
285417930
|
Max. measured value:
999.99 s
|
Max. voltage:
230 V
|
Measured range:
999.99 s
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ViscoClock plus M2
|
Type of auxiliary energy:
Mains connection
|
Weight:
450 g
|
Width:
90 mm
Die ViscoClock plus ist ein elektronisches Zeitmessgerät für Glas-Kapillarviskosimeter zur Bestimmung der kinematischen und relativen Viskosität. Der Nachfolger der bewährten ViscoClock bietet jetzt auch die Möglichkeit zur Datenspeicherung und eine erleichterte Handhabung. Die ViscoClock plus ist für folgende Viskosimeter von SI Analytics geeignet: Ubbelohde (DIN; ISO; ASTM; Mikro) und Mikro-Ostwald. Für Absolutmessungen der Viskosität sind Viskosimeter mit Kalibrierung für automatische Messungen zu verwenden. Die ViscoClock plus bestimmt die Durchlaufzeit im Viskosimeter automatisch unter Verwendung von Infrarot-Lichtschranken. Das Viskosimeter mit der Probe wird in die ViscoClock plus eingesetzt und zur Temperierung in ein Thermostatenbad gehängt. Nach erfolgter Temperierung wird die Probe in die Messkugel gepumpt und die Durchlaufzeit automatisch erfasst. Das große Display ermöglicht ein leichtes Ablesen der Messwerte sowie zusätzlicher Informationen: Datum, Uhrzeit, Proben- und Viskosimeter-Identifikationsnummer.Die ViscoClock plus ist in allen SI Analytics Durchsicht-Thermostaten einsetzbar.Lieferumfang: Gerät incl. Durchsichtthermostat CT72/2 für Temperaturen von -40 bis 150 °C
Art Kapillarviskosimeter:
Ubbelohde
|
Kapillare- Nr.:
IIIa
|
Konstante:
5
|
Calibration:
Nein
|
Capacity:
15 ... 20 ml
|
Int. Ø:
3.00 mm
|
Length:
290 mm
|
Manufacturer Article Number:
285400370
|
Max. capacity:
20 ml
|
Max. measured value:
5000 mm²/s
|
Measured range:
500 ... 5,000 mm²/s
|
Min. capacity:
15 ml
|
Min. measured value:
500 mm²/s
|
Standard:
ISO 3105, DIN 51562
|
Type:
530 31
To ISO 3105, DIN 51562.Not calibrated, without documentation of the viscometer constant.For manual and automatic relative measurements.
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013828
|
Max. Viscosity:
80000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
1.4374 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
200 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU/UK/CH
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
1.4374 mNm
|
Type:
ROTAVISC hi-vi I Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
200 ... 80,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
Viscometers with a large range of functions to determine the viscosity of liquids in all areas of application, ranging from laboratory to quality control. The devices are suited for different viscosity ranges. With the optional software labworldsoft 6 visc, several devices can be operated at the same time, thus expanding data processing and connecting thermostats.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorScope of supply: Viscometers, stand ROTASTAND, spindles SP set-2, temperature sensor PT 100.8, protective bracket
For:
ViscoQC 100, ViscoQC 300
|
Manufacturer Article Number:
220928
|
Type:
ETD 300
Temperature control from +25 to +300 °CFull control via the ViscoQC displayFor measurement of bitumen, hot melts, polymers, waxesComplies with ASTM D4402, D3236, AASHTO T316, EN 13302 and more
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010014015
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. temperature:
300 °C
|
Max. torque:
0.7187 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
100 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
2 %
|
Speed:
0.01 ... 200 1/min
|
Temperature:
300 °C
|
Torque:
0.7187 mNm
|
Type:
ROTATEMP me-vi
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
The combination of ROTAVISC viscometers and the ROTATEMP high-temperature system enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Stepless speed controlFast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Compatible with the optional labworldsoft® 6 Visc viscometer softwareScope of supply: Viscometer, stand ROTASTAND, high-performance temperature system ROTATEMP, spindles SP set-2, temperature sensor PT 100.8
Description:
Ball 2
|
Manufacturer Article Number:
800-0003
|
UNSPSC:
41-10-17-01
Variants from €92.00*
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010014058
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. temperature:
125 °C
|
Max. torque:
0.7187 mNm
|
Min. speed:
0.01 1/min
|
Min. temperature:
-25 °C
|
Min. viscosity:
100 mPa·s
|
Plug type:
EU
|
Speed:
0.01 ... 200 1/min
|
Temperature:
-25 ... 125 °C
|
Torque:
0.7187 mNm
|
Type:
CBC ROTAVISC me-vi
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
Durch die Kombination der Rotationsviskosimeter ROTAVISC mit dem Wärmebad- und Umwälzthermostat CBC VISC lite kann die Messung der Proben direkt im Heizbad erfolgen, wodurch eine genaue Temperaturkontrolle gewährleistet und präzise und zuverlässige Messergebnisse erzielt werden. Ein zweites Becherglas (600 ml) kann während der Messung vortemperiert werden.Stufenlose Drehzahl4,3" TFT DisplayEinfache RampenfunktionUmweltfreundliches natürliches Kältemittel R290Lieferumfang: Viskosimeter, Stativ ROTASTAND, Bad und Umwälzthermostat CBC VISC lite, Spindeln SP set-2, Temperaturfühler PT 100.8
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010014004
|
Max. Viscosity:
6000000 mPa·s
|
Max. speed:
200 1/min
|
Max. temperature:
300 °C
|
Max. torque:
0.0673 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
1 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
2 %
|
Speed:
0.01 ... 200 1/min
|
Temperature:
300 °C
|
Torque:
0.0673 mNm
|
Type:
ROTATEMP lo-vi
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
1 ... 6,000,000 mPa·s
The combination of ROTAVISC viscometers and the ROTATEMP high-temperature system enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Stepless speed controlFast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Compatible with the optional labworldsoft® 6 Visc viscometer softwareScope of supply: Viscometer, stand ROTASTAND, high-performance temperature system ROTATEMP, spindles SP set-1, temperature sensor PT 100.8
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013993
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. temperature:
300 °C
|
Max. torque:
0.7187 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
100 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
2 %
|
Speed:
0.01 ... 200 1/min
|
Temperature:
300 °C
|
Torque:
0.7187 mNm
|
Type:
ROTATEMP SBS me-vi
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
The combination of ROTAVISC viscometers and the ROTATEMP high-temperature system enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Stepless speed controlFast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Compatible with the optional labworldsoft® 6 Visc viscometer softwareEquipped with advanced ball bearing technology for demanding applications such as high sample throughput or frequent spindle changes.Scope of supply: Viscometer, stand ROTASTAND, high-performance temperature system ROTATEMP, spindles SP set-2, temperature sensor PT 100.8
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013826
|
Max. Viscosity:
6000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.0673 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
1 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU/UK/CH
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.0673 mNm
|
Type:
ROTAVISC lo-vi Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
1 ... 6,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
Viscometers with a large range of functions to determine the viscosity of liquids in all areas of application, ranging from laboratory to quality control. The devices are suited for different viscosity ranges. With the optional software labworldsoft 6 visc, several devices can be operated at the same time, thus expanding data processing and connecting thermostats.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorScope of supply: Viscometers, stand ROTASTAND, spindles SP set-1, temperature sensor PT 100.8, protective bracket
Depth:
270 mm
|
Dimensions (WxDxH):
265 x 270 x 220 mm
|
Height:
220 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
0020113825
|
Max. temperature:
300 °C
|
Max. voltage:
230 V
|
Min. voltage:
220 V
|
Plug type:
EU
|
Power supply:
220 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ROTATEMP
|
Type of auxiliary energy:
Mains connection
|
Width:
265 mm
For use with IKA ROTAVISC viscometers. It enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Fast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Heating oven and control unit are combined in one device with a small footprintCompatible with the optional labworldsoft® 6 Visc viscometer software
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010014045
|
Max. Viscosity:
6000000 mPa·s
|
Max. speed:
200 1/min
|
Max. temperature:
125 °C
|
Max. torque:
0.0673 mNm
|
Min. speed:
0.01 1/min
|
Min. temperature:
-25 °C
|
Min. viscosity:
1 mPa·s
|
Plug type:
EU
|
Speed:
0.01 ... 200 1/min
|
Temperature:
-25 ... 125 °C
|
Torque:
0.0673 mNm
|
Type:
CBC ROTAVISC lo-vi
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
1 ... 6,000,000 mPa·s
By combining the rotational viscometer with the CBC VISC lite heating bath and circulation thermostat, the samples can be measured directly in the heating bath, ensuring accurate temperature control and precise and reliable measurement results. A second beaker (600 ml) can be pre-tempered during the measurement.Stepless speed adjustment4.3" TFT displaySimple ramp functionEnvironmentally friendly natural refrigerant R290By combining the rotational viscometer with the CBC VISC lite heating bath and circulation thermostat, the samples can be measured directly in the heating bath, ensuring accurate temperature control and precise and reliable measurement results. A second beaker (600 ml) can be pre-tempered during the measurement.Stepless speed adjustment4.3" TFT displaySimple ramp functionEnvironmentally friendly natural refrigerant R290
Anzahl Messpositionen:
1
|
Accuracy:
0.01 ± s
|
Depth:
30 mm
|
Dimensions (WxDxH):
90 x 30 x 515 mm
|
Height:
515 mm
|
IP code:
IP 50
|
Manufacturer Article Number:
285417910
|
Max. measured value:
999.99 s
|
Max. voltage:
230 V
|
Measured range:
999.99 s
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ViscoClock plus M1
|
Type of auxiliary energy:
Mains connection
|
Weight:
450 g
|
Width:
90 mm
Die ViscoClock plus ist ein elektronisches Zeitmessgerät für Glas-Kapillarviskosimeter zur Bestimmung der kinematischen und relativen Viskosität. Der Nachfolger der bewährten ViscoClock bietet jetzt auch die Möglichkeit zur Datenspeicherung und eine erleichterte Handhabung. Die ViscoClock plus ist für folgende Viskosimeter von SI Analytics geeignet: Ubbelohde (DIN; ISO; ASTM; Mikro) und Mikro-Ostwald. Für Absolutmessungen der Viskosität sind Viskosimeter mit Kalibrierung für automatische Messungen zu verwenden. Die ViscoClock plus bestimmt die Durchlaufzeit im Viskosimeter automatisch unter Verwendung von Infrarot-Lichtschranken. Das Viskosimeter mit der Probe wird in die ViscoClock plus eingesetzt und zur Temperierung in ein Thermostatenbad gehängt. Nach erfolgter Temperierung wird die Probe in die Messkugel gepumpt und die Durchlaufzeit automatisch erfasst. Das große Display ermöglicht ein leichtes Ablesen der Messwerte sowie zusätzlicher Informationen: Datum, Uhrzeit, Proben- und Viskosimeter-Identifikationsnummer.Die ViscoClock plus ist in allen SI Analytics Durchsicht-Thermostaten einsetzbar.Lieferumfang: Gerät incl. Durchsichtthermostat CT72/P für Temperaturen von 10 bis 60 °C
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013683
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.7187 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
100 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.7187 mNm
|
Type:
ROTAVISC SBS me-vi HELI Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
For simple or demanding viscosity measurement of low-viscosity liquids in all areas of application, ranging from the laboratory to quality control. The motorized HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorEquipped with advanced ball bearing technology for demanding applications such as high sample throughput or frequent spindle changesScope of supply: Viscometers, stand HELISTAND, spindles SP set-2 and T-SP-SET, temperature sensor PT 100.8, protective bracketSpecificationsRotation speed:0.01 ... 200 rpmTemperature range:-100 ... 300 °CAccuracy:1 %Repeatability:0,2 %Stroke max.:142 mmDimensions stand (L x W x H):351 x 372 x 629 mmWeight:7.1 kgPower supply:100 ... 240 V, 50/60 HzProtection class acc. to DIN EN 60529:IP 40
Description:
Stand with mounting clamp
|
For:
Viscotester™ VT 1 plus, VT 2 plus/Viscotester™ 3 L, 3 R
|
Manufacturer Article Number:
222-1678
|
Type:
Stand
Variants from €123.00*
For:
PTD 100 Cone-Plate
|
Manufacturer Article Number:
253825
|
Material:
Stainless steel 1.4404
|
Type:
CP42
|
Ø:
28 mm
Depth:
262 mm
|
Dimensions (WxD):
351 x 262 mm
|
Manufacturer Article Number:
0020128647
|
Max. voltage:
230 V
|
Min. voltage:
220 V
|
Plug type:
EU
|
Power supply:
220 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Stand height:
330 mm
|
Type:
HELISTAND Set
|
Weight:
6 kg
|
Width:
351 mm
The motorised HELISTAND stand allows reliable viscosity measurements of highly viscous samples. It moves the mounted viscometer and its rotating body slowly and evenly up and down in the sample.The scope of supply includes T-spindles (T-SP-1 to T-SP-6) for non-flowing samples.
For:
ViscoQC 100, ViscoQC 300
|
Manufacturer Article Number:
253764
|
Type:
PTD 100 Cone-Plate
With integrated Peltier temperature control unit.For small sample volumes from 0.5 ml to 2 mlUpgrades ViscoQC 100 and 300 to a cone/plate viscometerTwo in one: cone/plate and temperature control unit combinedAutomated measurement gap adjustmentMagnetic coupling, Toolmaster™ function and temperature sensor as standard
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013731
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.7187 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
100 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.7187 mNm
|
Type:
ROTAVISC me-vi HELI Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
For simple or demanding viscosity measurement of low-viscosity liquids in all areas of application, ranging from the laboratory to quality control. The motorized HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorScope of supply: Viscometers, stand HELISTAND, spindles SP set-2 and T-SP-SET, temperature sensor PT 100.8, protective bracket
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013824
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.7187 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
100 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU/UK/CH
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.7187 mNm
|
Type:
ROTAVISC SBS me-vi Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
Viscometers with a large range of functions to determine the viscosity of liquids in all areas of application, ranging from laboratory to quality control. The devices are suited for different viscosity ranges. With the optional software labworldsoft 6 visc, several devices can be operated at the same time, thus expanding data processing and connecting thermostats.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorEquipped with advanced ball bearing technology for demanding applications such as high sample throughput or frequent spindle changesScope of supply: Viscometers, stand ROTASTAND, spindles SP set-2, temperature sensor PT 100.8, protective bracket
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010014031
|
Max. Viscosity:
40000000 mPa·s
|
Max. speed:
200 1/min
|
Max. temperature:
125 °C
|
Max. torque:
0.7187 mNm
|
Min. speed:
0.01 1/min
|
Min. temperature:
-25 °C
|
Min. viscosity:
100 mPa·s
|
Plug type:
EU
|
Speed:
0.01 ... 200 1/min
|
Temperature:
-25 ... 125 °C
|
Torque:
0.7187 mNm
|
Type:
CBC ROTAVISC SBS me-vi
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
100 ... 40,000,000 mPa·s
Durch die Kombination der Rotationsviskosimeter ROTAVISC mit dem Wärmebad- und Umwälzthermostat CBC VISC lite kann die Messung der Proben direkt im Heizbad erfolgen, wodurch eine genaue Temperaturkontrolle gewährleistet und präzise und zuverlässige Messergebnisse erzielt werden. Ein zweites Becherglas (600 ml) kann während der Messung vortemperiert werden.Stufenlose Drehzahl4,3" TFT DisplayEinfache RampenfunktionUmweltfreundliches natürliches Kältemittel R290Ausgestattet mit fortschrittlicher Kugellagertechnik für anspruchsvolle Anwendungen wie z.B. bei hohem Probendurchsatz oder häufigem Spindelwechsel.Lieferumfang: Viskosimeter, Stativ ROTASTAND, Bad und Umwälzthermostat CBC VISC lite, Spindeln SP set-2, Temperaturfühler PT 100.8
For:
ETD 300
|
Manufacturer Article Number:
261100
|
Material:
Stainless steel 1.4404
|
Type:
SC4-27
Depth:
262 mm
|
Dimensions (WxD):
351 x 262 mm
|
Manufacturer Article Number:
0020116429
|
Max. voltage:
230 V
|
Min. voltage:
220 V
|
Plug type:
EU
|
Power supply:
220 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Stand height:
330 mm
|
Type:
HELISTAND
|
Weight:
6 kg
|
Width:
351 mm
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*