With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.Hazardous Substance DataGHSSignal wordGefahrH-SatzH220P-SatzP102, P210, P377, P381, P403UNNR2037SDSLink

With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.Hazardous Substance DataGHSSignal wordGefahrH-SatzH220P-SatzP102, P210, P377, P381, P403UNNR2037SDSLink

With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.

Chrome plated steel. Tripods are meant to be used in conjunction with wire gauze, triangles or a sand bath. Holding ring with 150 mm diameter can be reduced to 125 mm with the supplied reducement attachment. Adjustable height from 200 up to 300 mm.

Plate attachment can be used as a protective table mat. Quadrupod made of stainless steel, feet removable.

With bow and gripping tips.

For all types of gas. Bow-shaped. With flint.

Zinc-plated steel wire. With pipeclay tubes.

Jaws protected with 2 rubber pads each. Arm length: 160mm.

Simple power supply through the electrical connector with an integrated switch for power on / off, no dangerous gas supply and gas leakage.Electrical power supply instead of gasFast heat up without a flameHighest security operated through an RCD: suitable for educationNo waste and storage of gas cartridgesContinuous power regulation through the optional power regulatorHeat protection through the optional glass support: deposition for dishes and flasksImproved heat protection with an improved glass supportClean odorless working in regular atmosphere without a flameThe components need to be ordered separately.SpecificationsPower supply:590W / 230VDimensions (diam. x H):125 x 180mmWeight:800gMax. temperature:900°CHeated area:diam. 38mm

C 206 GLS pierceable cartridgePiercing cartridge with integrated gas lock system according to EN 417: 2012. For bunsen burner without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches.CV470 Plus and CV 300 Plus valve cartridgeWith safety valve. For bunsen burner Labogaz® 470.CV 360 valve cartridgeWith safety valve. For gas-safety burner schuett phoenix (Cat.-No. 9.018 761).Safety valve allows removal of partially used valve gas cartidges.C 206 GLS pierceable cartridgePiercing cartridge with integrated gas lock system according to EN 417: 2012. For bunsen burner without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches.CV470 Plus and CV 300 Plus valve cartridgeWith safety valve. For bunsen burner Labogaz® 470.CV 360 valve cartridgeWith safety valve. For gas-safety burner schuett phoenix (Cat.-No. 9.018 761).Safety valve allows removal of partially used valve gas cartidges.Hazardous Substance DataGHSSignal wordGefahrH-SatzH220P-SatzP102, P210, P377, P381, P403UNNR2037SDSLink

For metallic gas cartridges according to DIN EN 417:2012. Outside thread M 10 x 1.

With piezoelectric ignition device. For all types of gas.

With wick height adjuster and sealing cap. Capacity approx. 60ml.

DIN 30665. Air regulation.

35 % propane, 65 % butaneEN 417: 2012, UN 2037With self-closing valve35 % propane, 65 % butaneEN 417: 2012, UN 2037With self-closing valveHazardous Substance DataGHSSignal wordGefahrH-SatzH220, H280P-SatzP102, P210, P377, P381, P410+P403UNNR2037SDSLink

Zinc-plated steel. With circular top and flared legs.Zinc plating of tripod stands serves as temporary corrosion protection. May peel off after direct contact with open burner flame.

Power controller LR1 for continuous energy regulation between 0 to 100 %. Stand mounting device for fitting the Power Cube onto a retort stand. Stainless steel retort rod for attachment directly to the back of the casing, length approx. 13cm.

Remanit 4301. Dismountable. Stainless steel feet.

Electro polished.

Thickness 3,8 mm, chamfered edges. Usable above open burner flame. Ideal as heating surface in place of a wire gauze or pipeclay triangle.

Wironit CrNi 18/12. Straight, with triangular stirrup jaws.

Acc. to DIN 30665, with air regulation, without low flame.

Burners according to DIN 30665 cannot be switched off completely. A small flame remains burning even if needle valve or stop cock are turned off. The gas flow shall be disconnected by means of the central stop cock in the laboratory.