Connection size:
6,5 … 10 mm
|
Depth:
14 mm
|
Height:
57 mm
|
Manufacturer Article Number:
0053800
|
Material housing:
SAN
|
UNSPSC:
41111931
|
Width:
102 mm
For liquid flow from 50 ml/min in horizontal position, and 140 ml/min in vertical position. Minimum air flow 3 l/min horizontal and 8 l/min vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids or over +50 °C.
Connection size:
6 … 11 mm
|
Depth:
15 mm
|
Height:
40
|
Manufacturer Article Number:
0053900
|
Material housing:
SAN
|
Width:
90 mm
For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.
Int. Ø:
1 mm
|
Manufacturer Article Number:
6263546
|
UNSPSC:
41105108
With connector and Tube Clip.
For:
LLG-uniPERISTALTICPUMP 1
|
Int. tubing Ø:
1 mm
|
Manufacturer Article Number:
6263542
|
Max. int. tubing Ø:
1 mm
Incl. PharMed® tubing.
Ext. Ø:
6,3 mm
|
Ext. Ø:
6.3 mm
|
Int. Ø:
3.1 mm
|
Manufacturer Article Number:
6263552
|
UNSPSC:
41105108
With connector and Tube Clip.
Colour:
Blue/green
|
Int. Ø:
1.75 mm
|
Manufacturer Article Number:
070534-19-ND
|
UNSPSC:
41-10-51-00
|
Wall thickness:
0,85 mm
With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
Colour:
Yellow/blue
|
Int. Ø:
1.52 mm
|
Manufacturer Article Number:
070535-17-ND
|
UNSPSC:
41105108
|
Wall thickness:
0,85 mm
With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
Colour:
Yellow/blue
|
Int. Ø:
1.52 mm
|
Length:
380 mm
|
Manufacturer Article Number:
070603-19-ND
|
UNSPSC:
41105108
|
Wall thickness:
0,85 mm
Long flex life, high-precision tubing with 3 colour-coded bridges. Suitable for peristaltic pumps and for food and beverage dispensing. Contains no BPA or phthalates. Broad resistance to acids and alkalis. Meets USP Klasse VI and ISO 10993.
Colour:
Clear
|
Int. Ø:
2.79 mm
|
Manufacturer Article Number:
070534-24L-ND
|
Max. temperature resistance:
74 °C
|
Min. temperature resistance:
-50 °C
|
Shore hardness:
55 A
|
Temperature resistance:
-50 ... 74 °C
|
UNSPSC:
41105108
|
Wall thickness:
0.85 mm
Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
Description:
Foot-switch
|
For:
Hei-FLOW Expert 120, 600/Ultimate 120, 600
|
Manufacturer Article Number:
526-14100-00
|
UNSPSC:
41-10-48-04
Variants from €159.00*
Description:
gas-tight G 2"
|
Manufacturer Article Number:
5601-0130
|
UNSPSC:
41-10-51-07
Nickel-plated brass. G 2" steel fine outer thread.
Variants from €60.60*
Depth:
130 mm
|
Dimensions (WxDxH):
99 x 130 x 177 mm
|
Flow rate:
200 ... 1,300 ml/min
|
Height:
177 mm
|
Manufacturer Article Number:
U179093/153257
|
Material head:
PP
|
Max. flow rate:
1300 ml/min
|
Max. voltage:
115 V
|
Min. flow rate:
200 ml/min
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
12 W
|
Type:
U NF 100 KT.18 RC
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Weight:
1 kg
|
Width:
99 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 8 mm
Variants from €908.00*
Depth:
130 mm
|
Dimensions (WxDxH):
99 x 130 x 177 mm
|
Flow rate:
200 ... 1,300 ml/min
|
Height:
177 mm
|
Manufacturer Article Number:
179092/153257
|
Material head:
PTFE
|
Max. flow rate:
1300 ml/min
|
Max. voltage:
240 V
|
Min. flow rate:
200 ml/min
|
Min. voltage:
100 V
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
12 W
|
Type:
NF 100 FT.18 S
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Weight:
1 kg
|
Width:
99 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 8 mm
Variants from €718.00*
Depth:
160 mm
|
Dimensions (WxDxH):
104 x 160 x 188 mm
|
Flow rate:
500 ... 3,000 ml/min
|
Height:
188 mm
|
Manufacturer Article Number:
U179108/153257
|
Material head:
PP
|
Max. flow rate:
3000 ml/min
|
Max. voltage:
115 V
|
Min. flow rate:
500 ml/min
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
29 W
|
Type:
U NF 1.300 KT.18 S
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Width:
104 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 12 mm
Variants from €985.00*
Depth:
130 mm
|
Dimensions (WxDxH):
99 x 130 x 177 mm
|
Flow rate:
200 ... 1,300 ml/min
|
Height:
177 mm
|
Manufacturer Article Number:
U179096/153257
|
Material head:
PP
|
Max. flow rate:
1300 ml/min
|
Max. voltage:
115 V
|
Min. flow rate:
200 ml/min
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
12 W
|
Type:
U NF 1.100 KT.18 S
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Weight:
1 kg
|
Width:
99 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 8 mm
Variants from €836.00*
Depth:
160 mm
|
Dimensions (WxDxH):
104 x 160 x 188 mm
|
Flow rate:
500 ... 3,000 ml/min
|
Height:
188 mm
|
Manufacturer Article Number:
U179105/153257
|
Material head:
PP
|
Max. flow rate:
3000 ml/min
|
Max. voltage:
115 V
|
Min. flow rate:
500 ml/min
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
29 W
|
Type:
U NF 300 KT.18 RC
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Width:
104 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm
Variants from €1,098.00*
Depth:
160 mm
|
Dimensions (WxDxH):
104 x 160 x 188 mm
|
Flow rate:
500 ... 3,000 ml/min
|
Height:
188 mm
|
Manufacturer Article Number:
U179102/153257
|
Material head:
PP
|
Max. flow rate:
3000 ml/min
|
Max. voltage:
115 V
|
Min. flow rate:
500 ml/min
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
29 W
|
Type:
U NF 300 KT.18 S
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Width:
104 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm
Variants from €913.00*
Depth:
150 mm
|
Dimensions (WxDxH):
93 x 150 x 144 mm
|
Dosing volume:
1 ... 999 ml
|
Flow rate:
1 ... 100 ml/min
|
Height:
144 mm
|
IP code:
IP 65
|
Liquid temperature:
5 ... 80 °C
|
Manufacturer Article Number:
U167221/160160
|
Material head:
PVDF
|
Max. dosing volume:
999 ml
|
Max. flow rate:
100 ml/min
|
Max. liquid temperature:
80 °C
|
Max. operating pressure:
6 bar
|
Max. suction height:
3000 mm
|
Max. voltage:
115 V
|
Min. dosing volume:
1 ml
|
Min. flow rate:
1 ml/min
|
Min. liquid temperature:
5 °C
|
Plug type:
US
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Type:
U FEM 1.10 TT.18RCP2
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Width:
93 mm
Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size
Variants from €2,184.00*
Depth:
150 mm
|
Dimensions (WxDxH):
93 x 150 x 144 mm
|
Dosing volume:
0.03 ... 999 ml
|
Flow rate:
0.03 ... 20 ml/min
|
Height:
144 mm
|
IP code:
IP 65
|
Liquid temperature:
5 ... 80 °C
|
Manufacturer Article Number:
U166075/165467
|
Material head:
PP
|
Max. dosing volume:
999 ml
|
Max. flow rate:
20 ml/min
|
Max. liquid temperature:
80 °C
|
Max. operating pressure:
6 bar
|
Max. suction height:
2000 mm
|
Max. voltage:
115 V
|
Min. dosing volume:
0.03 ml
|
Min. flow rate:
0.03 ml/min
|
Min. liquid temperature:
5 °C
|
Plug type:
US
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Type:
U FEM 1.02 KT.18RCP
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Weight:
0.9 kg
|
Width:
93 mm
Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size
Variants from €2,197.00*
Depth:
130 mm
|
Dimensions (WxDxH):
99 x 130 x 177 mm
|
Flow rate:
200 ... 1,300 ml/min
|
Height:
177 mm
|
Manufacturer Article Number:
U179099/153257
|
Material head:
PP
|
Max. flow rate:
1300 ml/min
|
Max. voltage:
115 V
|
Min. flow rate:
200 ml/min
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
12 W
|
Type:
U NF 1.100 KT.18 RC
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Weight:
1 kg
|
Width:
99 mm
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 8 mm
Variants from €1,026.00*
Depth:
150 mm
|
Dimensions (WxDxH):
93 x 150 x 144 mm
|
Dosing volume:
0.03 ... 999 ml
|
Flow rate:
0.03 ... 20 ml/min
|
Height:
144 mm
|
IP code:
IP 65
|
Liquid temperature:
5 ... 80 °C
|
Manufacturer Article Number:
U164970/165467
|
Material head:
PTFE
|
Max. dosing volume:
999 ml
|
Max. flow rate:
20 ml/min
|
Max. liquid temperature:
80 °C
|
Max. operating pressure:
6 bar
|
Max. suction height:
2000 mm
|
Max. voltage:
115 V
|
Min. dosing volume:
0.03 ml
|
Min. flow rate:
0.03 ml/min
|
Min. liquid temperature:
5 °C
|
Plug type:
US
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Type:
U FEM 1.02 FT.18S
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Weight:
0.9 kg
|
Width:
93 mm
Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size
Variants from €1,643.00*
Depth:
150 mm
|
Dimensions (WxDxH):
93 x 150 x 144 mm
|
Dosing volume:
1 ... 999 ml
|
Flow rate:
1 ... 100 ml/min
|
Height:
144 mm
|
IP code:
IP 65
|
Liquid temperature:
5 ... 80 °C
|
Manufacturer Article Number:
U167530/160160
|
Material head:
PVDF
|
Max. dosing volume:
999 ml
|
Max. flow rate:
100 ml/min
|
Max. liquid temperature:
80 °C
|
Max. operating pressure:
6 bar
|
Max. suction height:
3000 mm
|
Max. voltage:
115 V
|
Min. dosing volume:
1 ml
|
Min. flow rate:
1 ml/min
|
Min. liquid temperature:
5 °C
|
Plug type:
US
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Type:
U FEM 1.10 TT.18S2
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105105
|
Width:
93 mm
Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size
Variants from €1,648.00*
Flow rate per stroke:
200 ml
|
Immersion depth:
500 mm
|
Immersion tube Ø:
32 mm
|
Manufacturer Article Number:
5600-0502
For decanting acids, caustic solutions and aggressive detergentsExcellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tubeFor barrels and tanks from 30 to 1000 l
Flow rate per stroke:
200 ml
|
Immersion depth:
500 mm
|
Immersion tube Ø:
32 mm
|
Manufacturer Article Number:
5600-0501
For decanting acids, caustic solutions and aggressive detergentsExcellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tubeFor barrels and tanks from 30 to 1000 l
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*