Ext. Ø:
60 mm
|
Int. Ø:
52 mm
|
Manufacturer Article Number:
600-M-060
|
Material:
Agate
|
Nominal capacity:
13 ml
|
UNSPSC:
41-10-17-02
|
With pestle:
Yes
Agate. Polished. Standard quality. Other sizes available on request.
Variants from €81.27*
Manufacturer Article Number:
LP-8011EG
|
Max. Feed quantity/ Flow rate ml:
1200
|
Max. speed rpm:
22000
|
Max. volume of work ml:
1200
|
Min. speed rpm:
18000
|
No. of grinding stations:
1
|
Plug type:
EU
|
Type:
8011EG
|
Type of auxiliary energy:
230V AC
|
UNSPSC:
41101500
|
With:
Glass container, 1.2 l
Versatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Models 8010 EG/ES with mechanical timer (3 minutes).Two velocity settings (18000 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container (stainless steel or glass) with handle and lid
Depth:
85 mm
|
Dimensions (WxDxH):
85 x 85 x 240 mm
|
Feed particle size:
10 mm
|
Feed quantity:
80 ml
|
Height:
240 mm
|
IP code:
IP 43
|
Manufacturer Article Number:
0002900003
|
Max. feed particle size:
10 mm
|
Max. feed quantity:
80 ml
|
Max. speed:
28000 1/min
|
Max. voltage:
230 V·AC
|
Plug type:
CH
|
Power supply:
230 V·AC, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Speed:
28,000 1/min
|
Type:
A 11 basic
|
Type of auxiliary energy:
Mains connection
|
Weight:
1.5 kg
|
Width:
85 mm
Batch mill for 2 different grinding procedures:Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery).Moist and gluey materials can be pulverized by adding waterGrinding chamber made of Tefcel (PTFE, glass fibre-reinforced) with stainless steel inlet (1.4571), useful volume 80ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamberOptionally, a 250ml grinding chamber is availableAccessories please order separately.
Depth:
145 mm
|
Dimensions (WxDxH):
130 x 145 x 250 mm
|
Feed particle size:
6 mm
|
Feed quantity:
50 ml
|
Height:
250 mm
|
IP code:
IP 41
|
Manufacturer Article Number:
0004020700
|
Max. feed particle size:
6 mm
|
Max. feed quantity:
50 ml
|
Max. speed:
25000 1/min
|
Max. voltage:
230 V·AC
|
Plug type:
EU
|
Power supply:
230 V·AC, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
0.24 kW
|
Speed:
25,000 1/min
|
Type:
A 10 basic
|
Type of auxiliary energy:
Mains connection
|
Weight:
2.9 kg
|
Width:
130 mm
|
With timer:
Yes
Newly designed batch mill for grinding of hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. During development of the mill, particular emphasis was placed on safety. The mill will only start when the lid is closed and it can only be opened at standstill. A quick stop feature further increases the safety of user.Digital timerCounter: Display of grinding timeInterval operationBrushless motor for long life and low noiseIntegrated cooling connectionsError Code DisplayEasy handling with keypadsEasy exchangeable beater/cutter for a variety of applicationsGrinding chamber reduction for small sample amounts ( included with delivery)Easy opening and closing of the lid with a bayonet lock
Disposable:
No
|
Manufacturer Article Number:
0025003960
|
Nominal capacity:
2000 ml
|
Type:
DI 2000 T
Dispergiergefäß mit Rotor-Stator System und Temperatursensor zum Dispergieren einer Vielzahl von Proben. Mit dem integrierten Temperatursensor kann eine Temperaturgrenze (-50 bis 80 °C) eingestellt und überwacht werden. Besonders für temperaturempfindliche Materialien geeignet.
Depth:
480 mm
|
Dimensions (WxDxH):
420 x 480 x 690 mm
|
Height:
690 mm
|
Manufacturer Article Number:
15.4030.00
|
Max. feed particle size:
70 mm
|
Max. final fineness:
250 µm
|
Max. speed:
3400 1/min
|
Max. throughput:
50 l/h
|
Max. voltage:
400 V
|
Min. speed:
2800 1/min
|
Power supply:
400 V, 50 Hz
|
Power supply frequency:
50 Hz
|
Rated capacity:
1790 W
|
Speed:
2,800 ... 3,400 1/min
|
Type of auxiliary energy:
Mains connection
|
Weight:
32 kg
|
Width:
420 mm
Ideal for pre and fine comminution of soft to medium-hard as well as fibrous or brittle, tough materials. They are essential for the areas of plastics, textiles, agriculture and forestry, environmental, construction materials, chemistry and foodstuffs. All cutting parts can be removed for cleaning in just a few seconds without tools, unbeatable fast, simple and efficient. Variable rotational speeds, different rotors, various knife geometries and replaceable blades ensure maximum flexibility and durability. For controlling the abrasion properties, the cutting tools are offered in different materials. The optimum airflow ensures fast comminution and secure protection against clogging. The FRITSCH Cyclone seperators (optional) for sample exhaustion enable simple feeding due to the strong airflow, increase throughput, and reduce the thermal load of the samples.Funnels, rotors, sieve inserts/sieve cassettes and collecting vessels must be ordered separately.
Disposable:
Yes
|
For:
Tube Mill control, Tube Mill 100 control
|
Manufacturer Article Number:
0020001984
|
Material:
PP
|
Nominal capacity:
40 ml
|
Sterile:
Yes
|
Type:
MT 40.10
Disposable grinding chambers with stainless steel beaters allow grinding up to Mohs hardness 5.
Variants from €96.50*
Head Ø:
28 mm
|
Length:
140 mm
|
Manufacturer Article Number:
8936
|
Material:
Stainless steel 1.4301
|
UNSPSC:
41-10-17-02
Disposable:
Yes
|
For:
Tube Mill control, Tube Mill 100 control
|
Manufacturer Article Number:
0020017838
|
Material:
PP
|
Nominal capacity:
40 ml
|
Type:
MT 40P.10
Disposable grinding chambers with stainless steel beater. The beater is bent with a 45° angle to create an optimal flow in the chamber. Especially for mixing fine powders.
Depth:
325 mm
|
Dimensions (WxDxH):
251 x 325 x 480 mm
|
Height:
480 mm
|
IP code:
IP 20
|
Manufacturer Article Number:
35010031
|
Max. final fineness:
200 µm
|
Max. speed:
6000 1/min
|
Max. voltage:
230 V
|
Min. speed:
50 1/min
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1 kW
|
Speed:
50 ... 6,000 1/min
|
Type of auxiliary energy:
Mains connection
|
Type of grinding:
trocken
|
Weight:
12 kg
|
Width:
251 mm
The PX-MFC 90 D is suitable for dry sample grinding in the laboratory.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.Sieves 0.2 mm up to 6 mm diameter availableSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionIntegrated speed control with LED display for speed and status messagesThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with cutting mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
Manufacturer Article Number:
03.647.0231
|
Mesh size:
0.08 mm
|
Type of perforation:
trapezoid
Disposable:
No
|
Manufacturer Article Number:
0025003961
|
Nominal capacity:
2000 ml
|
Type:
BL 2000
Gefäß mit Mixwerkzeug zum Nassmahlen einer Vielzahl von Proben.
Min. Aufgabemenge:
1 ml
|
Depth:
580 mm
|
Dimensions (WxDxH):
400 x 580 x 360 mm
|
Feed particle size:
5 mm
|
Feed quantity:
1 ... 60 ml
|
Height:
360 mm
|
Manufacturer Article Number:
07.5000.00
|
Max. feed particle size:
5 mm
|
Max. feed quantity:
60 ml
|
Max. final fineness:
100 nm
|
Max. speed:
2200 1/min
|
Max. voltage:
230 V
|
Min. speed:
200 1/min
|
Min. voltage:
115 V
|
No. of milling positions:
2
|
Plug type:
EU
|
Power supply:
115 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1200 W
|
Speed:
200 ... 2,200 1/min
|
Type of auxiliary energy:
Mains connection
|
Type of grinding:
trocken/nass
|
UNSPSC:
41-10-17-01
|
Weight:
44 kg
|
Width:
400 mm
Ideal zum Hochleistungsmahlen bis in den Nano-Bereich von harten, mittelharten, spröden und faserigen Materialien bei besonders kurzer Mahldauer - trocken, in Suspension oder unter Schutzgas in den Bereichen Nanotechnologie, Geologie, Mineralogie, Metallurgie, Keramik, Materialforschung, Mechanisches Legieren/Aktivieren, Pharmazie, Chemie, Biologie, Analysenvorbereitung. Auch zum hocheffizienten Mischen und Homogenisieren von Emulsionen und Pasten sind sie die perfekte Lösung.Mahlbecher und -kugeln werden in verschiedenen Größen zur optimalen Anpassung an das Probenvolumen und die gewünschte Endfeinheit, sowie in und Materialien angeboten - der beste Schutz gegen unerwünschte Kontamination.Die völlig neuartigen Verspannungen der Mahlbecher, die automatische Überprüfung der Mahlbecher-Arretierung in der Mühle, die Blockierung der Mühle bei unzulässigen Betriebszuständen wie auch bei Unwucht und die automatische Bechererkennung garantiert höchste Sicherheit.Mahlbecher und Mahlkugeln bitte separat bestellen.Software MillControl zur automatischen Steuerung der Planetenmühlen PULVERISETTE 5/7 premium line und Validierung der Mahlung auf Anfrage.
Depth:
250 mm
|
Dimensions (WxDxH):
300 x 250 x 350 mm
|
Feed particle size:
7 mm
|
Height:
350 mm
|
IP code:
IP 31
|
Manufacturer Article Number:
0025002643
|
Max. feed particle size:
7 mm
|
Max. speed:
20000 1/min
|
Max. voltage:
240 V
|
Min. speed:
3000 1/min
|
Min. voltage:
220 V
|
No. of milling positions:
1
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1000 W
|
Speed:
3,000 ... 20,000 1/min
|
Type of auxiliary energy:
Mains connection
|
Weight:
8.5 kg
|
Width:
300 mm
Universal mill for the pre- and fine comminution of hard, soft or fibrous samples.Adjustable interval operationIntegrated cooling in the grinding bowlGround product and coolant remain disconnectedUSB interfaceTemperature measurement and vessel recognition using RFIDTemperature limit can be set for temperature-sensitive materials, or for specific planned reactionsIntegrated weighing function for weighing without transferring the materialDispersion vessel and a disposable tube are available as accessoriesPlease order vessels separately.
Depth:
250 mm
|
Dimensions (WxDxH):
300 x 250 x 350 mm
|
Feed particle size:
7 mm
|
Height:
350 mm
|
IP code:
IP 31
|
Manufacturer Article Number:
0025002638
|
Max. feed particle size:
7 mm
|
Max. speed:
20000 1/min
|
Max. voltage:
240 V
|
Min. speed:
3000 1/min
|
Min. voltage:
220 V
|
No. of milling positions:
1
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1000 W
|
Speed:
3,000 ... 20,000 1/min
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
8.5 kg
|
Width:
300 mm
Universal mill for the pre- and fine comminution of hard, soft or fibrous samples.Adjustable interval operationIntegrated cooling in the grinding bowlGround product and coolant remain disconnectedUSB interfacePlease order vessels separately.
Depth:
250 mm
|
Dimensions (WxDxH):
300 x 250 x 350 mm
|
Feed particle size:
10 mm
|
Feed quantity:
150 ml
|
Height:
350 mm
|
IP code:
IP 31
|
Manufacturer Article Number:
0010007083
|
Max. feed particle size:
10 mm
|
Max. feed quantity:
150 ml
|
Max. speed:
20000 1/min
|
Max. voltage:
240 V
|
Min. speed:
3000 1/min
|
Min. voltage:
220 V
|
No. of milling positions:
1
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1000 W
|
Speed:
3,000 ... 20,000 1/min
|
Type of auxiliary energy:
Mains connection
|
Weight:
8.5 kg
|
Width:
300 mm
Universalmühle für die Vor- und Feinzerkleinerung von harten, weichen oder faserigen Proben. Es ist eine Vielzahl von Gefäßen für unterschiedliche Aufgaben in Trocken- und Nassmahlen erhältlich.Zuschaltbarer IntervallbetriebIntegrierte Kühlung im MahlbecherUSB SchnittstelleTemperaturmessung und Gefäßerkennung mittels RFIDEinstellbare Temperaturbegrenzung für temperaturempfindliche Materialien oder bestimmte vorgesehene ReaktionenIntegrierte Wiegefunktion für Wiegen ohne Umfüllen des MaterialsDispergiergefäß und Einweg-Tube als Zubehör erhältlichLieferumfang: Universalmühle, Schutzgehäuse MultiDrive TC 1, Mahlbecher MultiDrive MT 150.5
Depth:
700 mm
|
Dimensions (WxDxH):
582 x 700 x 1,675 mm
|
Height:
1675 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
20.727.0001
|
Max. feed particle size:
80 mm
|
Max. final fineness:
250 µm
|
Max. speed:
1500 1/min
|
Max. voltage:
400 V·3/N/PE
|
Nominal volume collecting vessel:
5000 ml
|
Power supply:
400 V·3/N/PE, 50 Hz
|
Power supply frequency:
50 Hz
|
Rated capacity:
1500 W
|
Speed:
1,500 1/min
|
Type:
SM 100
|
Type of auxiliary energy:
Mains connection
|
Weight:
73 kg
|
Width:
582 mm
|
Ø rotor:
129.5 mm
Rapid and gentle size reduction of bulky, soft, medium-hard, fibrous, elastic and thermally sensitive materials. They can be equipped with various rotors and hoppers. Scope of supply: cutting mill, 5 l collecting receptaclePlease order rotor, hopper, bottom sieve and base frame separately.
Depth:
760 mm
|
Dimensions (WxDxH):
576 x 760 x 1,675 mm
|
Height:
1675 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
20.728.0001
|
Max. feed particle size:
80 mm
|
Max. final fineness:
250 µm
|
Max. speed:
1500 1/min
|
Max. voltage:
400 V·3/N/PE
|
Nominal volume collecting vessel:
5000 ml
|
Power supply:
400 V·3/N/PE, 50 Hz
|
Power supply frequency:
50 Hz
|
Rated capacity:
2200 W
|
Speed:
1,500 1/min
|
Type:
SM 200
|
Type of auxiliary energy:
Mains connection
|
Weight:
90 kg
|
Width:
576 mm
|
Ø rotor:
129.5 mm
Rapid and gentle size reduction of bulky, soft, medium-hard, fibrous, elastic and thermally sensitive materials. They can be equipped with various rotors and hoppers. Optimum cutting effects thanks to double acting cutting barsQuick and easy cleaning without tools due to fold-back housing with smooth surfaces and push-fit rotor and sievesScope of supply: cutting mill, 5 l collecting receptacle, base framePlease order rotor, hopper and bottom sieve separately.
Disposable:
No
|
Manufacturer Article Number:
0025003962
|
Nominal capacity:
2000 ml
|
Type:
BL 2000 T
Gefäß mit Mixwerkzeug zum Nassmahlen einer Vielzahl von Proben. Mit dem integrierten Temperatursensor kann eine Temperaturgrenze (-50 bis 80 °C) eingestellt und überwacht werden. Besonders für temperaturempfindliche Materialien geeignet.
Disposable:
No
|
Manufacturer Article Number:
0025003967
|
Material:
Stainless steel
|
Nominal capacity:
250 ml
|
Type:
MI 250
Mahlkammer mit Edelstahlschläger zum Trockenmahlen einer Vielzahl von Proben. Die spezielle Gefäßdichtung ermöglicht den Druckablass über den Deckel während des Zerkleinerungsvorgangs von sehr feinem Pulver.
Depth:
750 mm
|
Dimensions (WxDxH):
576 x 750 x 1,677 mm
|
Height:
1677 mm
|
IP code:
IP 20
|
Manufacturer Article Number:
20.729.0002
|
Max. feed particle size:
80 mm
|
Max. final fineness:
250 µm
|
Max. speed:
3000 1/min
|
Max. voltage:
230 V
|
Min. speed:
100 1/min
|
Min. voltage:
220 V
|
Nominal volume collecting vessel:
5000 ml
|
Plug type:
EU
|
Power supply:
220 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
3000 W
|
Speed:
100 ... 3,000 1/min
|
Type:
SM 300
|
Type of auxiliary energy:
Mains connection
|
Weight:
160 kg
|
Width:
576 mm
|
Ø rotor:
129.5 mm
Rapid and gentle size reduction of bulky, soft, medium-hard, fibrous, elastic and thermally sensitive materials. They can be equipped with various rotors and hoppers. The most powerful model, the SM 300, is especially suitable for cutting heterogeneous mixtures such as household waste, plastic materials, computer and electronic scrap. The mills are also used for organic materials like wood, roots, bones, plants and feed pellets.Powerful size reduction thanks to 3kW drive with high torque and RES technologyOptimum cutting effects thanks to double acting cutting bars Quick and easy cleaning without tools due to fold-back housing with smooth surfaces and push-fit rotor and sievesScope of supply: cutting mill, 5 l collecting receptacle, base framePlease order rotor, hopper and bottom sieve separately.
Depth:
530 mm
|
Dimensions (WxDxH):
370 x 530 x 500 mm
|
Feed particle size:
10 mm
|
Feed quantity:
225 ml
|
Height:
500 mm
|
Manufacturer Article Number:
06.2000.00
|
Max. feed particle size:
10 mm
|
Max. feed quantity:
225 ml
|
Max. final fineness:
1 µm
|
Max. speed:
650 1/min
|
Max. voltage:
230 V
|
Min. speed:
100 1/min
|
Min. voltage:
115 V
|
No. of milling positions:
1
|
Plug type:
EU
|
Power supply:
115 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Speed:
100 ... 650 1/min
|
Type of auxiliary energy:
Mains connection
|
Type of grinding:
trocken/nass
|
Weight:
63 kg
|
Width:
370 mm
Ideal for fast, loss-free fine grinding of hard, medium-hard, brittle and moist materials - dry, in suspension, or under inert gas in the areas of geology, mineralogy, metallurgy, ceramics, pharmaceuticals, chemistry, biology, sample preparation for analysis.Sample can be processed from a few mg to several kg at a wide range of fineness levels down to less than 1 µm. They are especially easy to operate and fast and easy to clean. Suitable for continuous, heavy duty usage and guarantee safe clamping of the grinding bowls.Matching grinding parts of different materials are available to provide max.protection against undesired contamination. In addition to size-reduction, planetary ball mills can also be used for mixing and homogenising of emulsions and pastes or for mechanical alloying and activation.Grinding bowls and grinding balls must be ordered additionally.
Description:
Ersatzteilset für Mehrweg-Mahlbecher
|
For:
MMT 40.1/MMT 100.1
|
Manufacturer Article Number:
0020003378
|
Type:
A-MMT.100
Lieferumfang: 100 x Dichtung, 10 x Schläger, 10 x Kupplung
Depth:
250 mm
|
Dimensions (WxDxH):
300 x 250 x 350 mm
|
Feed particle size:
10 mm
|
Feed quantity:
250 ml
|
Height:
350 mm
|
IP code:
IP 31
|
Manufacturer Article Number:
0010007086
|
Max. feed particle size:
10 mm
|
Max. feed quantity:
250 ml
|
Max. speed:
20000 1/min
|
Max. voltage:
240 V
|
Min. speed:
3000 1/min
|
Min. voltage:
220 V
|
No. of milling positions:
1
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1000 W
|
Speed:
3,000 ... 20,000 1/min
|
Type of auxiliary energy:
Mains connection
|
Weight:
8.5 kg
|
Width:
300 mm
Universalmühle für die Vor- und Feinzerkleinerung von harten, weichen oder faserigen Proben. Es ist eine Vielzahl von Gefäßen für unterschiedliche Aufgaben in Trocken- und Nassmahlen erhältlich.Zuschaltbarer IntervallbetriebIntegrierte Kühlung im MahlbecherUSB SchnittstelleTemperaturmessung und Gefäßerkennung mittels RFIDEinstellbare Temperaturbegrenzung für temperaturempfindliche Materialien oder bestimmte vorgesehene ReaktionenIntegrierte Wiegefunktion für Wiegen ohne Umfüllen des MaterialsDispergiergefäß und Einweg-Tube als Zubehör erhältlichLieferumfang: Universalmühle, Schutzgehäuse MultiDrive TC 1, Mixbecher MultiDrive BT 250.5
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*