Capacity ml:
1000
|
Manufacturer Article Number:
ESS01
|
Type:
Storage solution
|
UNSPSC:
41-11-61-05
Cleaning, rinse, regeneration and storage solution. Designed to extend the useful life of pH electrodes.Cleaning, rinse, regeneration and storage solution. Designed to extend the useful life of pH electrodes.Hazardous Substance DataSDSLink
Variants from €28.91*
Manufacturer Article Number:
0105500
|
Material:
SAN
|
Nominal capacity:
1000 ml
|
Standard:
DIN 12672
|
Type of closure:
Screw cap
|
With stopcock:
No
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.Graduations, ml:Subdivisions, ml0 to 20.12 to 100.510 to 1001.5100 to 30010300 to 100050
Manufacturer Article Number:
06460108
|
Measuring range °C:
37 ... 65
Strips for 8 temperatures. 5 types cover the measuring range 37 to 260 °C, each strip displays 8 different temperatures. Each strip measures 50 x 18 mm.
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Conductivity:
0,001 µS/cm ... 1000 mS/cm
|
Conductivity accuracy:
±0.5 %
|
Conductivity resolution:
0,001 µS/0,01 µS/0,1 µS/1 µS/0,01 mS/0,1 mS/1 mS
|
Depth:
180 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
80 x 180 x 55 mm
|
Height:
55 mm
|
IP code:
IP 67
|
Interfaces:
USB
|
Manufacturer Article Number:
2CA301
|
Max. voltage battery/rechargeable battery:
1.5 V
|
No. of batteries/rechargeable batteries:
4
|
Salinity:
0 ... 70
|
Salinity resolution:
0.1
|
TDS accuracy:
±0,5 %
|
TDS range:
0 ... 1999 mg/l/0,01 ... 199,9 g/l
|
TDS resolution:
1 mg/l/0,01 g/l/0,1 g/l
|
Temperature:
-5.0 ... 105.0 °C
|
Temperature accuracy:
±0.1 °C
|
Temperature resolution:
0.1 °C
|
Type:
Cond 3310 Set 1
|
Type of auxiliary energy:
Battery/rechargeable battery
|
UNSPSC:
41-00-00-00
|
Width:
80 mm
Komfortables und vielseitiges Leitfähigkeitsmessgerät mit eingebautem zeitgesteuerten Datenlogger und Messwertspeicher für 5000 GLP-konforme Einträge für ausgedehnte Datensammlungen. Mit hinterleuchtetem Graphikdisplay und menügesteuerter Bedienung für ein Plus an Komfort und Sicherheit. Wasserdicht und robust. Für die Messung von Leitfähigkeit, spez. Widerstand, Salinität und TDS. Große Auswahl an anschließbaren Messzellen, erweiterte Zellkonstantenauswahl, automatische und manueller Temperaturkompensation (auch abschaltbar) mit linearer sowie nichtlinearer Funktion für Reinstwasser und natürliche Wasser nach EN 27 888.Lieferumfang: Konduktometer, Tragekoffer, Leitfähigkeits-Messzelle TetraCon® 325, Leitfähigkeitsstandard 1413 µS/cm bei 25 °C, Stativ, Becher, Kurzbedienungsanleitung, CD-ROM, Batterien, Software, USB-Kabel
Cable length:
3 m
|
Cell constant:
0.475 1/cm
|
Conductivity:
1 µS/cm ... 2 S/cm
|
Connection plug:
Digital
|
Manufacturer Article Number:
301711
|
Material shaft:
Epoxy
|
Max. pressure:
2.5 bar
|
Max. temperature:
100 °C
|
Min. temperature:
0 °C
|
Shaft length:
120 mm
|
Shaft Ø:
15.3 mm
|
Temperature:
0 ... 100 °C
|
Temperature sensor:
NTC 30 kOhm
|
Type:
TetraCon® 925-3
For connection to WTW IDS measuring instruments.IDS conductivity cell probe TetraCon® 925:Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.TetraCon® 925-3:Like TetraCon® 925, but cable length 3 mIDS conductivity cell probe TetraCon® 925/LV:Intelligent digital 4-pole cell with integral temperature sensor. Fork design, suitable for small volumes (at least 2.5ml) as well as for viscous samples. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.IDS conductivity cell probe LR 925/01:Intelligent digital 2-pole cell with integral temperature sensor and flowthrough cell D 01/T for measuring of low conductivity values (
Variants from €620.00*
30%
Adjusting program:
External
|
Depth:
317 mm
|
Depth weighing plate:
90 mm
|
Dimensions (WxDxH):
219 x 317 x 345 mm
|
Height:
345 mm
|
Linearity:
±0,06 mg
|
Manufacturer Article Number:
BCE124-1S
|
Max. load:
120 g
|
Max. voltage:
240 V
|
Min. voltage:
100 V
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Readability:
0,1 mg
|
Reproducibility:
0,1 mg
|
Type:
BCE124-1S
|
Type of auxiliary energy:
Mains connection
|
Weighing plate (WxD):
Ø 90 mm
|
Weight:
6200 g
|
Width:
219 mm
|
With draft shield:
Yes
The large portfolio offers the right model for every weighing task. With many convenience functions for efficiency and accuracy in the laboratory. Quality "Made in Germany".Modern sensors ensure very fast stabilisation timeAutomatic, internal calibration and adjustment function (isoCAL) for all "i" modelsWeighing platform made of stainless steelExcellent readability and operability with hybrid touch displayAutomatic detection of connected Sartorius accessoriesDirect data transfer to connected PCs with USB-C and RS232 interface without need of additional software12 integrated applications with GLP/GMP-compliant protocolEasy to clean, high chemical resistanceMultilingual interfaceHigh weighing spaceEasy access to weighing platform through side doors and upper sliding doorSpecially coated windscreen against electrostatic chargeAll models also available as approved versions for EU/France.Scope of supply: Analytical balance, power supply unit, display protection cover
Variants from €1,351.00*
Depth:
300 mm
|
Dimensions (WxDxH):
150 x 300 x 294 mm
|
Height:
294 mm
|
Manufacturer Article Number:
0105600
|
No. of sedimentation cones:
2
|
Width:
150 mm
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
25%
Accuracy temperature:
±0.1 °C
|
Accuracy temperature Number:
0.1 °C
|
Battery/rechargeable battery:
4 x AA
|
Designation ANSI:
AA
|
IP code:
IP 67
|
Manufacturer Article Number:
2AA112
|
Max. temperature:
105 °C
|
Min. temperature:
-5 °C
|
No. of batteries/rechargeable batteries:
4
|
Temperature:
-5 ... 105 °C
|
Type:
pH 3110 Set 2
|
Type of auxiliary energy:
Battery/rechargeable battery
|
UNSPSC:
56-12-20-01
|
mV range:
±1200,0/±2000
|
mV range accuracy:
±0,3 (±1200,0)/±1 (±2000)
|
pH range:
-2,000 ... 19,999
|
pH range accuracy:
±0,1/±0,01/±0,005
|
pH range resolution:
0.1/0.01/0.001
Die WTW pH/mV Taschenmessgeräte der ProfiLine Serie sind robust und wasserdicht nach IP 67. Einfaches und funktionales pH/mV (Redox-)-Messgerät mit vereinfachter Tastatur zur klaren und sicheren Bedienung. Automatische AutoRead-Funktion für reproduzierbare Messergebnisse. 3-Punkt-Kalibrierung mit WTW Technischen Puffern oder DIN/NIST-Puffern. Die bewährte DIN-Buchse zum Anschluss der pH-Elektroden erlaubt problemlose pH-Messung in nasser Umgebung. Die Geräte können mit Batterien oder Akkus betrieben werden.Lieferumfang: pH-/Redox-Messgerät, Koffer, pH-Sensor SenTix® 41, Pufferlösung STP 4 und STP 7, 3 mol/l KCl, Stativ, Becher, Kurzbedienungsanleitung, CD-ROM, Batterien
25%
Accuracy temperature:
±0.1 °C
|
Accuracy temperature Number:
0.1 °C
|
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Depth:
190 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
230 x 190 x 80 mm
|
Height:
80 mm
|
IP code:
IP 43
|
Manufacturer Article Number:
1AA114
|
Max. temperature:
105 °C
|
Max. voltage:
240 V
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Min. temperature:
-5 °C
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
4
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Temperature:
-5 ... 105 °C
|
Type:
pH 7110 SET 4
|
Type of auxiliary energy:
Battery/mains connection
|
Weight:
1 kg
|
Width:
230 mm
|
mV range:
±1200,0/±2000
|
mV range accuracy:
±0,3 (±1200,0)/±1 (±2000)
|
pH range:
-2,0 ... 20,0/-2,00 ... 20,00/-2,000 ... 19,999
|
pH range accuracy:
±0,1/±0,01/±0,005
|
pH range resolution:
0.1/0.01/0.001
Einfaches pH/mV-Labormessgerät für alle Aufgaben, bei denen schnell und ohne Aufwand zuverlässige, genaue Messwerte benötigt werden. Mit großem LCD-Segmentdisplay und übersichtlicher Tastatur. Die AutoRead-Funktion sorgt für einwandfreie und reproduzierbare Messergebnisse. Ein eingebauter Timer erinnert an die regelmäßige Kalibrierung.Lieferumfang: Labormessgerät mit DIN-Anschluss, Steckernetzgerät, Stativ, SenTix® 81, 3 mol/l KCl, Puffer 4,7/10,01
25%
Accuracy temperature:
±0.1 °C
|
Accuracy temperature Number:
0.1 °C
|
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Depth:
190 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
230 x 190 x 80 mm
|
Height:
80 mm
|
IP code:
IP 43
|
Manufacturer Article Number:
1AA112
|
Max. temperature:
105 °C
|
Max. voltage:
240 V
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Min. temperature:
-5 °C
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
4
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Temperature:
-5 ... 105 °C
|
Type:
pH 7110 SET 2
|
Type of auxiliary energy:
Battery/mains connection
|
Weight:
1 kg
|
Width:
230 mm
|
mV range:
±1200,0/±2000
|
mV range accuracy:
±0,3 (±1200,0)/±1 (±2000)
|
pH range:
-2,0 ... 20,0/-2,00 ... 20,00/-2,000 ... 19,999
|
pH range accuracy:
±0,1/±0,01/±0,005
|
pH range resolution:
0.1/0.01/0.001
Einfaches pH/mV-Labormessgerät für alle Aufgaben, bei denen schnell und ohne Aufwand zuverlässige, genaue Messwerte benötigt werden. Mit großem LCD-Segmentdisplay und übersichtlicher Tastatur. Die AutoRead-Funktion sorgt für einwandfreie und reproduzierbare Messergebnisse. Ein eingebauter Timer erinnert an die regelmäßige Kalibrierung.Lieferumfang: Labormessgerät mit DIN-Anschluss, Steckernetzgerät, Stativ, SenTix® 41, 3 mol/l KCl, Puffer 4,7/10,01
25%
Accuracy temperature:
±0.1 °C
|
Accuracy temperature Number:
0.1 °C
|
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Depth:
190 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
230 x 190 x 80 mm
|
Height:
80 mm
|
IP code:
IP 43
|
Manufacturer Article Number:
1AA120
|
Max. temperature:
105 °C
|
Max. voltage:
240 V
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Min. temperature:
-5 °C
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
4
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Temperature:
-5 ... 105 °C
|
Type:
pH 7110 BNC
|
Type of auxiliary energy:
Battery/mains connection
|
Weight:
1 kg
|
Width:
230 mm
|
mV range:
±1200,0/±2000
|
mV range accuracy:
±0,3 (±1200,0)/±1 (±2000)
|
pH range:
-2,0 ... 20,0/-2,00 ... 20,00/-2,000 ... 19,999
|
pH range accuracy:
±0,1/±0,01/±0,005
|
pH range resolution:
0.1/0.01/0.001
Einfaches pH/mV-Labormessgerät für alle Aufgaben, bei denen schnell und ohne Aufwand zuverlässige, genaue Messwerte benötigt werden. Mit großem LCD-Segmentdisplay und übersichtlicher Tastatur. Die AutoRead-Funktion sorgt für einwandfreie und reproduzierbare Messergebnisse. Ein eingebauter Timer erinnert an die regelmäßige Kalibrierung.Lieferumfang: Labormessgerät mit BNC-Anschluss, Steckernetzgerät, Stativ
25%
Accuracy temperature:
±0.1 °C
|
Accuracy temperature Number:
0.1 °C
|
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Depth:
190 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
230 x 190 x 80 mm
|
Height:
80 mm
|
IP code:
IP 43
|
Manufacturer Article Number:
1AA110
|
Max. temperature:
105 °C
|
Max. voltage:
240 V
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Min. temperature:
-5 °C
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
4
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Temperature:
-5 ... 105 °C
|
Type:
pH 7110
|
Type of auxiliary energy:
Battery/mains connection
|
Weight:
1 kg
|
Width:
230 mm
|
mV range:
±1200,0/±2000
|
mV range accuracy:
±0,3 (±1200,0)/±1 (±2000)
|
pH range:
-2,0 ... 20,0/-2,00 ... 20,00/-2,000 ... 19,999
|
pH range accuracy:
±0,1/±0,01/±0,005
|
pH range resolution:
0.1/0.01/0.001
Basic pH/mV laboratory instrument for all tasks where reliable, accurate readings are required quickly and easily. With large LCD segment display and easy-to-read keyboard. The AutoRead function ensures correct and repeatable measurement results. A built-in timer reminds the user of periodical calibration.Scope of supply: Instrument, mains power adapter, standSpecificationsRanges:All values ±1 digitpH:-2.0 ... 20.0 ± 0.1 pH
-2.00 ... 20.00 ± 0.01 pH
-2.000 ... 19.999 ± 0.005 pHmV:± (1200.0 ± 0.3) mV
± (2000 ±1) mVCalibration:1-, 2- or 3 point WTW technical buffer or DIN/NISTTemperature:-5.0 ... 105.0 °C ± 0.1 °CPower supply:Universal power supply 100 to 240 V, 50/60 Hz, 4 x 1.5 V AA or 4 x 1.2 V NiMH rechargeable batteries
Accuracy temperature ± °C:
0.5
|
Depth mm:
69
|
Height mm:
5
|
Manufacturer Article Number:
5005-0072
|
Measuring range temperature °C:
60
|
Protection class:
IP67
|
Range start temperature °C:
-30
|
Resolution temperature °C:
0.1
|
Storage readings:
10000
|
Type:
TempLOG TS60
|
Weight kg:
0.01
|
Width mm:
33
Ideal for low-cost temperature monitoring of transports. For evaluation, the data logger is connected to the USB interface and a PDF report is generated automatically. No hardware or software necessary.Auto generating PDF format data report60 days runtime10000 measurements every 10 minutesChange of configuration (alarm, interval ...) on requestIntegrated USB connectorStart by buttonLED Alarm displaySerial number stickerInclusive certificateFood-safe according to HACCPCompliant to EN12830 S,T,C,D,1 and GDPTemperature range:-30 ... 60 °CAccuracy:±0.5 °C at -20 °C ... 40 °C / ±1.0 °C in remaining rangeResolution:0.1 °CData memory:10000 measurementsRecording cycle:60 daysSampling interval:10 minutesShelf life:24 monthsDimensions (L x W x H):69 x 33 x 5 mmWeight:10 gIP code:IP67
Anzahl Messpositionen:
12
|
Messzeit:
7 d
|
Battery/rechargeable battery:
1 x CR2450
|
Designation IEC:
CR2450
|
GHS:
GHS05
|
Manufacturer Article Number:
208262
|
Max. measured value:
4000 mg/l
|
Max. pressure:
1250 hPa
|
Max. voltage:
240 V
|
Measured range:
0 ... 4,000 mg/l
|
Min. measured value:
0 mg/l
|
Min. pressure:
500 hPa
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
1
|
Plug type:
Universal
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Pressure:
500 ... 1,250 hPa
|
Type:
OxiTop®-i IS 12
|
Type of auxiliary energy:
Battery/mains connection
Easy-to-use, respirometric measuring system for determining the biological oxygen demand (BOD). The method is based on changes of pressure in a closed system using measuring heads attached to the sample bottles. The BOD can be determined simultaneously in up to 6 or 12 samples.No dilution of the sample requiredDirect reading of the BOD, the time course and the intermediate values on the graphical display of the measuring headsInput of the used sample volume directly at the measuring headMonitoring time between 1 and 7 daysPermanent display of the current status at each measuring headColoured measuring heads with adjustable, numerical sample identificationScope of supply: OxiTop®-i IS 6: 6 x measuring heads (3 x blue, 3 x grey), 6 x sample bottles PF600, 6 x rubber quivers, overflow measurement flasks, 6 x stirring rods, stirring rod remover, stirring platform SI 6OxiTop®-i IS 12: 12 x measuring heads (6 x blue, 6 x grey), 12 x sample bottles PF600, 12 x rubber quivers, overflow measurement flasks, 12 x stirring rods, stirring rod remover, stirring platform SI 12An incubator is required to operate the OxiTop®-i IS. Please order separately.SpecificationsPressure range:500 ... 1250 hPaBOD range:0 ... 4000 mg/lDisplay:Graphical LCD, background-illuminatedPower supply of measuring heads:
Power supply of stirring platform:1 x CR 2450
100 ... 240 V, 50/60 HzEasy-to-use, respirometric measuring system for determining the biological oxygen demand (BOD). The method is based on changes of pressure in a closed system using measuring heads attached to the sample bottles. The BOD can be determined simultaneously in up to 6 or 12 samples.No dilution of the sample requiredDirect reading of the BOD, the time course and the intermediate values on the graphical display of the measuring headsInput of the used sample volume directly at the measuring headMonitoring time between 1 and 7 daysPermanent display of the current status at each measuring headColoured measuring heads with adjustable, numerical sample identificationScope of supply: OxiTop®-i IS 6: 6 x measuring heads (3 x blue, 3 x grey), 6 x sample bottles PF600, 6 x rubber quivers, overflow measurement flasks, 6 x stirring rods, stirring rod remover, stirring platform SI 6OxiTop®-i IS 12: 12 x measuring heads (6 x blue, 6 x grey), 12 x sample bottles PF600, 12 x rubber quivers, overflow measurement flasks, 12 x stirring rods, stirring rod remover, stirring platform SI 12An incubator is required to operate the OxiTop®-i IS. Please order separately.Hazardous Substance DataGHSH-SatzH290, H314P-SatzP280, P301+P330+P331, P305+P351+P338
Variants from €3,161.00*
For:
NS14/23
|
Manufacturer Article Number:
05605500
|
Material:
Stainless steel
Stainless steel, nickel-plated. For securing the NS stopper.
Ground size:
NS14/23
|
Manufacturer Article Number:
604 0100
|
Material:
Soda-lime glass
|
Nominal capacity:
100 ml
Winkler pattern. Soda-lime glass.For determination of dissolved oxygen in water. The measured capacity is specified to ± 0,01ml. With white labelling area. Solid, bevelled glass stopper, secured with an accessory spring clip. Each bottle is adjusted to the relevant stopper. Stoppers and bottles are therefore not interchangeable. Each bottle and its stopper is marked with a unique, matching identification number.
Depth:
180 mm
|
Description:
2 channels, meter only
|
Dimensions (WxDxH):
80 x 180 x 55 mm
|
Height:
55 mm
|
IP code:
IP 67
|
Interfaces:
USB-A, Mini USB-B
|
Manufacturer Article Number:
2FD560
|
Max. voltage:
240 V
|
Min. voltage:
100 V
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
Multi 3620
|
Type:
Multi 3620
|
Type of auxiliary energy:
Mains connection/rechargeable battery
|
Width:
80 mm
Professional digital multiparameter meters for mobile measurement, with 3, 2 or 1 universal measurement channels, wireless preparation, colour graphic display (black/white display for Multi 3510), data logger manually or automatically (timed) and 2 (1 for Multi 3510) waterproof USB interfaces suitable for field use. Easy to clean with a soft brush under water jet.Multi 3630: The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Multi 3620: The Multi 3620 IDS with two universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to a cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Multi 3510: Sequential multi-parameter measurement. All WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors can be connected to the universal channel, either with cable or wireless module. Data transfer to PC with MultiLab® Importer. With Mini USB-B interface and black/white display.Multi 3620 IDS: Single meter in a carrying case with Quick Start Guide, CD-ROM and batteries, driver software for USB, cable, power supplyMulti 3620 IDS SET C: Meter in a carrying case with IDS sensors (digital pH sensor SenTix® 940, digital conductivity cell TetraCon® 925), QSC Kit, buffer 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM ProMulti 3620 IDS SET G: Meter in a large carrying case with IDS sensors (digital pH sensor SenTix® 940-3, optical sensor FDO® 925-3, digital conductivity cell TetraCon® 925-3), QSC Kit, stand, beaker buffer 4 and 7, conductivity standard, CD-ROM, batteries, cable, power supply , arming SM ProSpecificationsMeasuring range:depending on IDS sensorMemory Multi 3510 IDS:manual: 500 data records
automatic: 4500 data recordsMemory Multi 3630 IDS / Multi 3620 IDS:manual: 500 data records
automatic: 10,000 data recordsDimensions (W x D x H):approx. 180 x 80 x 55 mmWeight:400 gPower supply Multi 3510 IDS:4 alkaline batteries, USBPower supply Multi 3630 IDS / Multi 3620 IDS:PSU with charging function, 4 NiMH batteries (AA type), USBIP code:IP 67
Adjusting program:
External
|
Depth:
292 mm
|
Depth weighing plate:
118 mm
|
Dimensions (WxDxH):
218 x 292 x 80 mm
|
Height:
80 mm
|
Linearity:
±0,002 g
|
Manufacturer Article Number:
BML-300D3
|
Max. load:
300 g
|
Readability:
0,001 g
|
Type:
BML-300D3
|
Type of auxiliary energy:
Mains connection/rechargeable battery
|
Weighing plate (WxD):
Ø 118 mm
|
Weight:
2 kg
|
Width:
218 mm
|
With draft shield:
Yes
Sturdy balances ideal for routine tasks in terms of fast stabilisation and accurate repeatable results as well as the large high contrast LCD display.Model BML-300D3 with low draft shield for quick and easy loading from aboveModel BML-500D3 with high draft shield with 3 sliding doors for easy accessLarge, backlit LCD display, digit height 22 mmEasy navigation through direct access to the different functionsComfortable formulation / documentation with separate tara print-buttonStable temperature behaviorSafe results through external calibrationOperation with power supply or integrated batteryWith RS232 interface
Variants from €226.80*
Accuracy humidity ± % r.F.:
5
|
Accuracy temperature ± °C:
1
|
Depth mm:
91.5
|
Height mm:
20
|
Manufacturer Article Number:
5005-0210
|
Measuring range end humidity % r.F.:
100
|
Measuring range temperature °C:
70
|
Range start temperature °C:
-40
|
Resolution humidity % r.F.:
0.1
|
Resolution temperature °C:
0.1
|
Storage readings:
100000
|
Type:
LOG210
|
Type of auxiliary energy:
1 x 3,6 V Lithium AA
|
Weight kg:
0.07
|
Width mm:
42
PDF-data logger with displayMemory size: 100.000 measurementsUsable without software (default settings) (5-minute-interval, without alarm settings)Automatic PDF creationMovement sensor for shock recording e.g.: door or windows closingFree adjustable recording interval: 10 seconds to 24 hoursMax-Min-Display memory (resettable)Time marking functions for measuring resultsBattery lifetime approx. 4 years (recording interval >15 minutes)Status- and Alarm-LEDsIncludes wall mountFree software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.SpecificationsTemperatureMeasuring range:-40 to +70 °CAccuracy:0.1 °CPrecision:±0.5 °C (0 to +60 °C), otherwise ±1.0 °CHumidityMeasuring range:0 to 100 % R.H.Resolution:0.1% R.H.Accuracy:±3 % R.H. (40 to 60 %), ±3.5 % R.H. (20 to 40 % and 60 to 80 %), otherwise ±5 % R.H.Interface:
Housing:USB (integr.)
Plastic (ABS)Battery:1 x 3,6 Volt Lithium ½ AADimensions:91.5 x 42 x 20 mmWeight:approx. 70 g
Battery/rechargeable battery:
1 x 1.5 V, AA
|
Colour:
Grey
|
Depth:
74 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
44 x 74 x 115 mm
|
Height:
115 mm
|
Manufacturer Article Number:
30.1017.10
|
Max. temperature:
50 °C
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Min. temperature:
-20 °C
|
No. of batteries/rechargeable batteries:
1
|
Temperature:
-20 ... 50 °C
|
Type of auxiliary energy:
Battery
|
Weight:
110 g
|
Width:
44 mm
Digital thermometer, wall hanging, for indoor or outdoor use. With blue, splash-proof casing, selectable °C/°F ranges and battery.Weight:161 gDimensions (W x D x H):75 x 44 x 115 mm
Manufacturer Article Number:
30.3039.IT
|
Type:
Profi-Thermo-/Hygrometer KlimaLogg Pro
For accurate long-time monitoring and documentation of temperature and humidity. The data is measured by the device, up to 8 additional wireless transmitters can be attached. With alarm function in case of exceeding or falling below the limit values for temperature and humidity.Memory for up to 50000 values, which can be transferred to the PC via a USB transceiver for documentation and evaluationDisplay of maximum and minimum values as well as dew point with date and timeConnector for controlling external devicesFree software for data evaluation available as downloadIntegrated radio-controlled clockCan be placed onto a tabletop or fixed to the wallScope of supply: Thermo-Hygrometer, USB-Transceiver, 3 x AA-Batteries, Operating InstructionsAdditional radio transmitters for measuring temperature and humidity are available separately.SpecificationsTemperature range:0 ... 50 °CTemperature resolution:
Temperature measuring interval:0.1 °C
15 secondsTemperature accuracy:±1 °CHumidity range:1 ... 99 %Humidity resolution:
Humidity measuring interval:1 %
15 secondsHumidity accuracy:±3 % (35 ... 75 % r.H.) / ±5 % (76 ... 99 % r.H.)Transceiver range:
Housing material:Max. 100 m
ABSDimensions (W x D x H):25 x 98 x 137 mmWeight:147 gPower supply:3 x AA 1.5 V
Depth:
325 mm
|
Depth weighing plate:
90 mm
|
Dimensions (WxDxH):
205 x 325 x 305 mm
|
Height:
305 mm
|
Linearity:
±0,3 mg
|
Manufacturer Article Number:
BML-220D4
|
Max. load:
220 g
|
Readability:
0,1 mg
|
Reproducibility:
0,3 mg
|
Type:
BML-220D4
|
Type of auxiliary energy:
Mains connection
|
Weighing plate (WxD):
Ø 90 mm
|
Weight:
6 kg
|
Width:
205 mm
|
With draft shield:
Yes
Sturdy balance ideal for routine tasks in terms of fast stabilisation and accurate repeatable results as well as the large high contrast LCD display.With large draft shield with 3 sliding doors for easy accessLarge, backlit LCD display, digit height 22 mmEasy navigation through direct access to the diferent functionsComfortable formulation / documentation with separate tara print-buttonStable temperature behaviourSafe results through external calibrationOperation with power supplyWith RS232 interface
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013698
|
Max. Viscosity:
6000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.0673 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
15 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.0673 mNm
|
Type:
ROTAVISC lo-vi HELI Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
15 ... 6,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
For simple or demanding viscosity measurement of low-viscosity liquids in all areas of application, ranging from the laboratory to quality control. The motorized HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorScope of supply: Viscometers, stand HELISTAND, spindles SP set-1 and T-SP-SET, temperature sensor PT 100.8, protective bracketSpecificationsRotation speed:0.01 ... 200 rpmTemperature range:-100 ... 300 °CAccuracy:1 %Repeatability:0,2 %Stroke max.:142 mmDimensions stand (L x W x H):351 x 372 x 629 mmWeight:7.1 kgPower supply:100 ... 240 V, 50/60 HzProtection class acc. to DIN EN 60529:IP 40
Description:
Netzteil 24 V für LED/Summer-Kombination AL 251
|
Manufacturer Article Number:
1220-0355
Accessories for EBI 25 temperature and humidity data loggers.
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*