Article 1 - 24 from 1152

Pasteur pipettes, soda glass

Length: 300 mm Manufacturer Article Number: 3150162

Extra long tip, optimal for NMR applications. With constriction, without cotton wool.

€1,269.87*

Pipettes, Pasteur, PE

Manufacturer Article Number: 1131305 Material: PE Nominal capacity: 1 ml Package: Single packed Sterile: Yes UNSPSC: 15-12-19-00 UNSPSC: 41121509

Variants from €75.98*

From €267.96*

Variations

Pipette stand, horizontal, PP

Depth: 155 mm Height: 230 mm Manufacturer Article Number: 022.02.001 Material: PP No. of pipettes: 12 UNSPSC: 41122801 Width: 210 mm

Pipette stand for 12 pipettes, horizontal is made from moulded polypropylene which is autoclavable. On each side, 6 pipettes (longer than 22 cm) can be stored horizontally. Easy to clean.

€57.02*

Pasteur pipettes, PE, Macro

Bulb draw: 8.3 ml Length: 148 mm Manufacturer Article Number: 26 55 206 Nominal capacity: 6.0 ml Package: Single packed Sterile: Yes With graduation: No

For transfer of liquids. Resitant against almost all acids. Soft and elastic bulb.

Variants from €46.46*

€68.20*

Graduated cylinders, PP, class B, embossed scale

Colour: Transparent Colour graduation: Blue Division: 0.2 ml Height: 140 mm Manufacturer Article Number: 0256000 Material: PP Nominal capacity: 10 ml Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): Tall Tolerance: 0.2 ml UNSPSC: 41121805

Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.

From €10.86*

Variations

Measuring Cylinders, PP, Tall Form, Class B, Moulded Graduations

Autoclavable: Yes Colour: Transparent Division: 2.0 ml Food safe: Yes Graduation: 20 ml Height: 315 mm Manufacturer Article Number: 0108000 Material: PP Max. temperature resistance: 100 °C Nominal capacity: 250 ml Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): Tall Temperature resistance: 100 °C Tolerance: 2.0 ml Type of graduation: Embossed UNSPSC: 41121805 Ø: 41.5 mm

Conforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe.

Variants from €8.26*

From €13.20*

Variations

65%

Pipette rinser system

Height: 495 mm Height Insert mm: 280 Height mm: 495* Manufacturer Article Number: 0022200 Material: PP/PE Type: Pipette baskets Ø: 145 mm Ø mm: 145

Zur problemlosen und schonenden Reinigung von Pipetten nach dem Saugheberprinzip. Ein komplettes Spülsystem besteht aus Pipettenwascher, Reinigungsbehälter und Pipettenkorb, bitte jeweils separat bestellen. Hitzebeständig bis 105 °C, gute chemische Beständigkeit.Zur Aufnahme von Pipetten oder Büretten nach Mohr. Der Korb ist mit einem Griff und einem höhenverstellbaren Ring versehen. Der Boden aus elastischem PE verringert die Gefahr der Beschädigung der Pipetten. Höhe des Einsatzes 280 mm.

€26.00* €73.48* (64.62% saved)

61%

Pipette rinser system

Height: 734 mm Height Insert mm: - Height mm: 734 Manufacturer Article Number: 0021700 Material: PP/PE Type: Pipette rinser Ø: 170 mm Ø mm: 170

For easy and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of pipette washer, pipette soaking jar and pipette basket, please order separately. Heat resistant up to 105 °C, good chemical resistance.Pipette basket: For holding pipettes up to 600 mm or burettes acc. to Mohr. The basket is equipped with a handle and a height-adjustable ring. The bottom of elastic PE reduces the risk of damage to the pipettes.Pipette soaking jar: For pre-cleaning of the pipettesPipette rinser: For rinsing the pre-cleaned pipettes. The emptying siphon permits constant water exchange. The water inlet should be approx. 2 l/min.*with handle

€138.00* €345.70* (60.08% saved)

Pipette stand, vertical, PP

Manufacturer Article Number: 022.01.001 Material: PP No. of pipettes: 94 UNSPSC: 41122801

The pipette carousel can be rotated 360° and can hold up to 94 pipettes. The pipettes are placed vertically in the stand. The base plate has a raised edge which catches dripping liquids.

€66.64*

61%

Pipette rinser system

Height: 503 mm Height Insert mm: - Height mm: 503 Manufacturer Article Number: 0022100 Material: PP/PE Type: Pipette soaking jar Ø: 165 mm Ø mm: 165

Zur problemlosen und schonenden Reinigung von Pipetten nach dem Saugheberprinzip. Ein komplettes Spülsystem besteht aus Pipettenwascher, Reinigungsbehälter und Pipettenkorb, bitte jeweils separat bestellen. Hitzebeständig bis 105 °C, gute chemische Beständigkeit.Zur Vorreinigung der Pipetten.

€64.00* €160.60* (60.15% saved)

Graduated pipettes, Soda-lime glass, class B, amber stain graduation, type 3

Accuracy class: B Colour graduation: Brown Division: 0.01 ml Length: 360 mm Manufacturer Article Number: 1000129 Material: Soda-lime glass Nominal capacity: 0.5 ml Standard: DIN EN ISO 835 Tolerance: 0,0075 ±·ml Tolerance: 0,0075 ± ml Type of measuring pipettes: Type 3 UNSPSC: 41121510 With cotton plug end: No

EX (TD) calibrated. Tolerances better than class B requirements. With durable amber stain graduation, short line, graduated to tip, zero on top, type 3, acc. to DIN EN ISO 835. From 5ml with cotton plug end as standard.* Supplementary to DIN.

Variants from €5.98*

From €8.91*

Variations

Graduated pipettes, soda glass, class AS, type 3

Accuracy class: AS Colour graduation: Blue Division: 0.01 ml Length: 360 mm Manufacturer Article Number: 021.01.001 VE=10 Material: Glass Nominal capacity: 1 ml Standard: DIN EN ISO 835, DIN 12699 Tolerance: 0,007 ±·ml Tolerance: 0,007 ± ml Type of measuring pipettes: Type 3 UNSPSC: 41121510

Soda glass. Conformity-certified. With batch date identification. DIN EN ISO 835, DIN 12699. Calibrated to deliver (EX). Ring marks and graduations in permanent blue enamel.

Variants from €8.39*

€78.84*

Pasteur pipettes, PE

Length: 140 mm Manufacturer Article Number: 26 00 220 Nominal capacity: 1.3 ml Package: Bulk pack Sterile: No With graduation: No

For transfer of liquids. Resitant against almost all acids. Soft and elastic bulb.For transfer of liquids. Resistant against almost all acids. Soft and elastic bulb.

Variants from €26.34*

€50.60*

Pasteur pipettes, PE, Micro

Bulb draw: 3.7 ml Length: 152 mm Manufacturer Article Number: 26 55 151 Material: PE Nominal capacity: 3.0 ml Package: Single packed Sterile: Yes UNSPSC: 41121509

For transfer of liquids. Resitant against almost all acids. Soft and elastic bulb.

Variants from €53.50*

€63.80*

Tubing Versilic®, Silicone, 1 m

Ext. Ø: 8.0 mm Int. Ø: 5.0 mm Length: 1 m Manufacturer Article Number: 760420 Material: Silicone Max. delivery length: 25 m Max. temperature resistance: 200 °C Min. temperature resistance: -50 °C Shore hardness: 60 Temperature resistance: -50 ... 200 °C UNSPSC: 41105108 Wall thickness: 1.50 mm

Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).

Variants from €2.54*

From €4.68*

Variations

Rubber blowballs

Capacity ml: 5 Colour: Red Manufacturer Article Number: 4012520 Material: PVC Max. capacity: 5 ml Type: B Type: B oval Ø bores: 6 mm Ø mm: 30

Non-rigid PVC. Red-brown, smooth. With 6mm i.d. outlet hole.

€12.60*

Reagent reservoirs

Autoclavable: Yes Colour: White Depth: 50 mm Height: 37 mm Manufacturer Article Number: HS20821A Material: PP No. of chambers: 13 Type: Dual Solution UNSPSC: 41121522 Width: 125 mm With lid: Yes

Polypropylene solution basin/reagent reservoir has a standard 50mL basin on one side and 12 individual 5mL basins on the other side. Wells are angled both downward and outward, guiding multichannel pipettor tips toward a centered position, which helps to avoid contamination and waste. Imprinted indices identify samples; loose-fitting lids prevent evaporation and contamination. Non-sterile.

€238.56*

Measuring cylinders, PP, tall form, class B, blue graduated

Colour: Transparent Colour graduation: Blue Height: 135 mm Manufacturer Article Number: 016.06.010 Material: PP Max. temperature resistance: 60 °C Nominal capacity: 10 ml Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): Tall Standard: DIN 12681 / ISO 6706 Temperature resistance: 60 °C Tolerance: 0.200 ml UNSPSC: 41121805

Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.

From €7.93*

Variations

Graduated pipettes, Soda-lime glass, class AS, blue graduation, type 3

Accuracy class: AS Colour graduation: Blue Division: 0.01 ml Length: 360 mm Manufacturer Article Number: 1101129 Material: Soda-lime glass Nominal capacity: 0.5 ml Standard: DIN 12600, DIN EN ISO 835 Tolerance: 0,006 ±·ml Tolerance: 0,006 ± ml Type of measuring pipettes: Type 3 UNSPSC: 41121510 With cotton plug end: No

EX (TD) calibrated. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Main point ring graduation. High-contrast blue graduation. Graduated to the tip, zero on top. Type 3, acc. to DIN EN ISO 835. From 5ml with cotton plug end as standard.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

Variants from €4.79*

From €13.22*

Variations

Pipette Tips, PP

Capacity: 50 ... 1,000 µl Colour: Blue For type: Kartell®, Gilson®, Eppendorf® , Biohit®, Socorex® , HTL®, Nichiryo®, Finnpipette®, Thermo Manufacturer Article Number: 0094100 Material: PP Max. capacity: 1000 µl Min. capacity: 50 µl Package: Bag UNSPSC: 41121600 With graduation: No

From €46.92*

Variations

Pipette teats, latex

Height mm: 45 ± 5 Manufacturer Article Number: 0391400 Material: Latex Max. capacity: 2 ml UNSPSC: 41-12-15-10 Volume ml: 2

Suitable for ranvier dropping tubes and pasteur pipettes. With rim.

From €2.47*

Variations

Measuring Cylinders, PP, Short Form, Moulded Graduations

Autoclavable: Yes Division: 5 ml Food safe: Yes Graduation: 25 ml Height: 178 mm Manufacturer Article Number: 0081700 Material: PP Max. temperature resistance: 120 °C Nominal capacity: 100 ml Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): Low Temperature resistance: 120 °C Type of graduation: Embossed UNSPSC: 41121805 Ø: 34.0 mm

Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.

Variants from €6.04*

From €12.96*

Variations

Orsat blowball

Colour: Transparent Manufacturer Article Number: 4400001 Material: Natural rubber Type: Orsat blowball UNSPSC: 41121500

Natural rubber. Translucent.

€27.00*

Measuring cylinders, PMP, Class B, blue graduations

Autoclavable: Yes Colour graduation: Blue Division: 2 ml Food safe: Yes Height: 140 mm Manufacturer Article Number: 0257000 Material: PMP Nominal capacity: 10 ml Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): Tall Tolerance: 0.2 ml UNSPSC: 41121805

Tall form, with spout, transparent. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be permanently exceeded! Cleaning temperature below 60°C is recommended to preserve graduations and inscriptions. Food-safe.

From €12.80*

Variations

Article 1 - 24 from 1152

Promotion

Evaporating dishes, DURAN®

DIN 12336Flat-bottom with spoutAutoclavable

Variants from €12.30*

Variations

Evaporating basins, quartz glass

DIN 12336Flat-bottom with spout

Variants from €33.98*

Variations

Evaporating basins, porcelain, shallow form

Glazed inside and outside except for rim.

Variants from €13.80*

Variations

Promotion

Evaporating dishes, DURAN®

DIN 12336Flat-bottom with spoutAutoclavable

Variants from €12.30*

Variations

Evaporating basins, quartz glass

DIN 12336Flat-bottom with spout

Variants from €33.98*

Variations

Evaporating basins, porcelain, shallow form

Glazed inside and outside except for rim.

Variants from €13.80*

Variations

Professional Liquid Handling Products for Your Lab | häberle LABORTECHNIK

Every laboratory needs to work accurately and precisely with liquids. häberle LABORTECHNIK offers a comprehensive and diverse range of liquid handling products. We support you with perfectly suited and high-quality products for dosing, pipetting, measuring, and dispensing liquids, enabling you to work accurately, safely, and efficiently in the lab.

Looking to equip your lab professionally while keeping costs in check? We've got you covered. You can buy bulk liquid handling products from us and benefit from competitive prices, trusted brand quality, and fast delivery. Whether for major projects or your ongoing needs – you can order bulk liquid handling products and ensure a steady supply for smooth operations.

We know that accuracy matters in the lab. That's why we offer products that work precisely while being ergonomic and durable. With our solutions, you get reliable results, dose liquids safely, and make your workflows more efficient.

Explore our product range:

Pipettes and dispensing systems – for accurate and ergonomic liquid transfer
Pipette tips – compatible with leading brands, sterile, and precise
Dispensers, burettes, and bottle-top dispensers – for controlled reagent dispensing
Measuring cylinders, beakers, and laboratory bottles – ideal for measuring, mixing, and storing
Reservoirs, racks, and pipette holders – for organized and safe workspace management
Cleaning and maintenance accessories – to extend the lifespan of your instruments

All our products come from trusted manufacturers such as Brand, Eppendorf, ISOLAB, Vitlab, and LLG Labware, ensuring precision, reliability, and long-lasting quality.

Whether you operate in an academic lab, industrial facility, or research institution, our comprehensive liquid handling solutions help you streamline processes, reduce errors, and increase efficiency. Trust häberle LABORTECHNIK as your reliable partner for precise, sustainable, and professional liquid handling in laboratories of all sizes.

Frequently Asked Questions

What liquid handling products does häberle LABORTECHNIK offer?

We offer a comprehensive range of products for precise work with liquids – including pipettes and dispensing systems, pipette tips, dispensers, burettes, bottle adapters, as well as measuring cylinders, beakers, and laboratory bottles. The range is complemented by racks, holders, and accessories for cleaning and maintenance.

Are the liquid handling products suitable for precise and safe work?

Yes, all products are designed for accuracy, safety, and ergonomic use. They enable precise dosing, reduce sources of error, and support efficient and reproducible laboratory processes.

Can I order liquid handling products in large quantities?

Absolutely. We specialize in bulk orders. You benefit from attractive pricing, fast delivery, and reliable supply for daily laboratory operations or larger projects.

Which brands do you offer in the liquid handling category?

We work exclusively with renowned manufacturers such as Brand, Eppendorf, ISOLAB, Vitlab, LLG Labware, and other trusted laboratory brands known for quality and precision.

Which laboratories are these liquid handling products suitable for?

Our liquid handling products are specifically designed for use in research laboratories, quality control laboratories, and development and industrial research laboratories. They support precise workflows, efficient processes, and reliable results in these application areas.