Filter
Filter
IKA-Werke GmbH & Co.KG
Grinding mill, A 10 basic
Depth mm:
145
|
Dimensions (W x D x H) mm:
130 x 145 x 250
|
Feed size mm:
6
|
Height mm:
250
|
Max. Feed quantity/ Flow rate ml:
50
|
Max. speed rpm:
25000
|
No. of grinding stations:
1
|
Plug type:
EU
|
Rated capacity kW:
0.24
|
Type:
A 10 basic
|
Type of auxiliary energy:
230V AC
|
Weight kg:
2.9
|
Width mm:
130
|
max. Aufgabeguthärte Mohs:
5
Newly designed batch mill for grinding of hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. During development of the mill, particular emphasis was placed on safety. The mill will only start when the lid is closed and it can only be opened at standstill. A quick stop feature further increases the safety of user.Digital timerCounter: Display of grinding timeInterval operationBrushless motor for long life and low noiseIntegrated cooling connectionsError Code DisplayEasy handling with keypadsEasy exchangeable beater/cutter for a variety of applicationsGrinding chamber reduction for small sample amounts ( included with delivery)Easy opening and closing of the lid with a bayonet lockSpecificationsMotor rating input / output:300 / 240WSpeed:25000rpmChamber vol.:50mlPower-on time ON/OFF:5 / 10minAuto power off:yesTangential speed:73m/sMax. sample granule size:6mmDimensions (W x D x H):130 x 145 x 250 mmWeight:2,9 kgIP code:IP 41Supply requirements:220 - 240 V 50/60 Hz
€2,333.00*
Bürkle GmbH
ChemoSampler, PP
Colour:
Grey
|
Material:
PP
|
Nominal capacity:
1000 ml
|
Overall length:
1000 mm
Grey. For sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport.Resistant to acids and alkalisIncl. sample bottle 1000 mlExtension rod 100 cm is available as accessory
From
€68.80*
Bürkle GmbH
Disposable scoops LaboPlast® / SteriPlast®, PS
Colour:
White
|
Food safe:
Yes
|
Material:
PS
|
Nominal capacity:
2000 ml
|
Overall length:
381 mm
|
Sterile:
Yes
|
Type:
SteriPlast®
They are ideal for sampling of powder, granules and pastes. Individually packedSteriPlast® additionally gamma-sterilizedProduction, assembling and packaging acc. to Cleanroom class 7 (10000)According to EU food and FDA guidelines
From
€14.80*
30%
Waring
Laboratory Blender Waring®8010/8011
Max. Feed quantity/ Flow rate ml:
1200
|
Max. speed rpm:
22000
|
Max. volume of work ml:
1200
|
Min. speed rpm:
18000
|
No. of grinding stations:
1
|
Plug type:
EU
|
Type:
8011EG
|
Type of auxiliary energy:
230V AC
|
With:
Glass container, 1.2 l
Versatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Models 8010 EG/ES with mechanical timer (3 minutes).Two velocity settings (18000 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container (stainless steel or glass) with handle and lid
€721.00*
€1,030.00*
(30% saved)
15%
Bürkle GmbH
Vampire Sampler
Type:
Vampire sampler, complete
The self-priming peristaltic pump is also suitable for dirty or particle-containing substances with a viscosity of max. 500 mPas. Ideal for sampling from barrels, tanks, wells, water separators, waste water and sewage treatment plants. The samples are fed directly into the sample container via the closed hose system.Battery-powered hose pumpEasy cleaning and exchangeable hoses prevent impuritiesSuction depth up to 5 metresScope of supply: Drive unit, pump head, pump hose (30 cm, Marprene), suction hose (5 m, PE), hose connector (PP), sample bottle (250 ml, LDPE), bottle basket, two rechargeble batteries, battery charger
€908.48*
€1,068.80*
(15% saved)
3M Deutschland GmbH
3M™ Sponge-Stick
Package contents:
4 bags of 25
|
Type:
with 10 ml buffered peptone water broth
Sponges and swabs designed specifically for microbial surface sampling. 3M™ Sponge-Sticks are available in wet or dry formats, to fit many applications. The 1.5" x 3" 3M™ Sponge-Stick allows sampling without directly handling the sponge.
€379.80*
IKA-Werke GmbH & Co.KG
Accessories for batch mill Tube Mill control / Tube Mill 100 control
Description:
Disposable grinding chamber, 40 ml, sterile
|
For:
Tube Mill control, Tube Mill 100 control
*Supplied with: 100 x sealing, 10 x beater, 10 x coupling
€93.50*
interscience
Accessories for blender BagSystem®
Description:
bag storage for 12 bags
|
Type:
BagRack® Slide
€52.10*
Beijing Grinder
Accessories for centrifugal mill FM200
Type:
Rotor with 6 teeth, stainless steel
€283.80*
Beijing Grinder
Accessories for Cutting Mill CM100M1
Type:
Standard rotor, for medium hard, fibrous samples, stainless steel
€32.60*
Fritsch GmbH
Accessories for cutting mill PULVERISETTE 15
Type:
Collecting vessel, 3.5L
*made of stainless steelAlternative funnels as well as sieve inserts are also available in other perforations. Rotors as well as the sieve inserts are also offered in chromium-free steel.
€175.00*
Fritsch GmbH
Accessories for disk mill PULVERISETTE 13 classic line
Description:
hardened steel cast
|
Type:
Fixed grinding disk
Grinding disks are also in manganese steel and hardmetal tungsten carbide available.
€950.00*
Dräger Safety AG & Co. KGaA
Accessories for Gas Warining Device X-am® 7000
Type:
Charging module
This device is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The device can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal companion in a great number of applications where reliable monitoring of oxygen, toxic and combustible gases and vapors in ambient air is necessary.Basic unit with rubber-boot, carrying strap, calibration adapter, water and dust filter. In order to get a fully operational unit, a power pack and up to 5 sensors have to be ordered. And, optionally, a built-in pump or a datalogger can be ordered.SpecificationsTemperature:
Pressure:
Humidity:-20 ... +55 °C, short-term -40 ... +60 °C
700 ... 1300 hPa
10 ... 95 % r.F.Alarms (visual/audible):360° flashing LEDs / 100 dB(A) at 30 cmCharging time:3.5 to 7 hours, depending on battery typePump mode:maximum hose length of 45 mDimensions (W x H x D):150 x 140 x 75 mmWeight (basic unit/battery):600 g / 490 g (3,0 Ah), 730 g (6,0 Ah)Ingress protection:IP 67Approvals:ATEX, MED, CSA, IECEx
€51.00*
IKA-Werke GmbH & Co.KG
Accessories for Grinding mill, A10 basic
Description:
Cutter, stainless steel
|
Type:
A 10.1
A 10.1 Cutter, stainless steel: For most brittle materials with a Mohs hardness up to 5.A 10.3 Cutter, hard metal: Made from tungsten carbide for hard materials with a Mohs hardness up to 9.A 10.2 Star-shaped Cutter, stainless steel: For specific lightweight materials like paper, dried plant parts, plastics and for smooth-elastic materials.A 10.4 Grinding chamber reduction: For small grinding volumes.
€61.00*
IKA-Werke GmbH & Co.KG
Accessories for Grinding mill, A11 basic
Description:
Grinding container, 250ml
|
Type:
A 11.4
A 11.1 Spare beater: For pulverising substances with a Mohs hardness up to 6.A 11.2 Cutter: For pulverising soft, fibrous grinding materials.A 11.3 Beater, hard metal: For pulverising substances with a Mohs hardness up to 9, chrome-carbide coatedA 11.4 Grinding container, 250ml: Made of polycarbonate with stainless steel inlet. Not suitable for cooling with N2, only applicable with double beater A 11.6.A 11.5 Spare grinding container, 80ml: Made of Tefcel (PTFE, glass faser-reinforced) with stainless steel inlet. Excellent resistance to chemicals and low temperatures (- 200 °C).A 11.6 Dubbel beater: For use up to Mohs hardness 3. Only applicable with grinding chamber A 11.4.A 11.7 Funnel: Prevents splashing by pouring in liquid nitrogen in the grinding chamber A 11.5.
€124.00*
Retsch GmbH
Accessories for Knife Mill GM 200/300
Description:
Knife, stainless steel with serrated blades
|
Type:
GM 200
€22.80*
Beijing Grinder
Accessories for knife mill HM100
Description:
Grinding vessel 1 l, transparent plastic, autoclavable
Grinding vessels, lids, blades and scrapers for use with knife mill HM100.
€16.59*
Fritsch GmbH
Accessories for knife mill PULVERISETTE 11
Type:
Standard grinding vessel, polycarbonate, 1.4 l, autoclavable
Grinding vessels in further materials, sickle knives with different cutting edges and various materials, single-use grinding vessel as well as further accessories are available.
€33.00*
Maassen GmbH
Accessories for Laboratory Presses
Description:
Press die set for Alucups, 40 mm
|
Pressure max. t:
40
The 13 mm press die is supplied in a wooden box (for 32 and 40 mm: optional)The 32 and 40 mm press die can be combined to save costs, since the same parts can be usedAll press dies from 10 mm have a vacuum connection with a special self-locking tubing adapter, which makes it easier to connect and disconnectFurther diameters available on request.
€55.00*
Rotor siehe 9010382 FEUMA
Accessories for MemoryBlender and GK900
Description:
Container, stainless steel
|
For:
GK900, MemoryBlender
|
Volume ml:
2000
Beakers for laboratory mixer MemoryBlender and mixer GK900.
€243.50*
Bürkle GmbH
Accessories for Micro-Sampler
For diam. mm:
12
|
Nominal capacity ml:
0.2
Tips for Micro-Sampler.
€81.80*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Your watch lists
Loading...