Filter
Filter
Vacuubrand GmbH & Co.KG
Diaphragm pumps, Aluminium PTFE design, ME 1, MD 1
Connector:
CH
|
Dimensions (W x D x H) mm:
303 x 143 x 163
|
Flow rate (50/60Hz) L / min.:
20 / 23.33
|
Number of steps:
3
|
Type:
MD 1
|
Ultimate vacuum mbar:
1.5
|
Weight kg:
6.5
The diaphragm pumps ME 1 offer a compact and high performance solution. With their easy-to-use functionality, they are a perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.Typical applications for the ME 1 are aqueous filtrations. The PTFE diaphragm and valves are rugged and provide high chemical resistance. If aluminium has the required specific resistance, solvent-containing samples can also be filtrated.Country-specific power cord versions available on request.
€629.00*
Vacuubrand GmbH & Co.KG
Diaphragm vacuum pumps -NT Series, Chemistry design
Connector:
UK
|
Dimensions (W x D x H) mm:
243 x 254 x 198
|
Number of steps:
1
|
Type:
ME 4C NT
|
Ultimate vacuum without / with gas ballast mbar (abs.):
70
|
max. discharge flow m³ / hr.:
3.9 / 4.3
Improved performance, increased pumping speed and lower ultimate vacuum extends applications in both the laboratory and in industrial applicationsLong-life diaphragm with PTFE sandwich construction and unstressed diaphragm supportEasy service/exchange of diaphragm or valves due to novel integrated valve head assembly. Easy dismantling, cleaning and reassembly without requiring readjustmentVery quiet and ultra low vibration due to compact drive with patented motor control system. Ideal as a built-in component for sensitive equipment in both the laboratory and in industrySuperior vapour tolerance due to integral tubing connections and gas ballast valve for continuous purge (for ME 16C NT, MZ 2C NT, MD 4C / 12C NT and MV 10C NT)Easy to clean due to smooth exterior surfacesThe VARIO® design provides vacuum control by precise and continuous adaption of the chemistry diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.Diaphragm pump MD 4CRL NT with reduced leakage rate (0.001 mbar x l/s).Country-specific power cord versions available on request.
€1,600.00*
KNF NEUBERGER GmbH
Diaphragm vacuum pumps LABOPORT®
Flow rate l / min.:
20
|
Height mm:
207
|
Length mm:
312
|
Type:
N 820.3 FT.18
|
Ultimate vacuum mbar (abs).:
8
|
Width mm:
154
Application: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, DistillationFlow rate up to 2.04 m³/h / Ultimate vacuum up to 8 mbar abs.High level of vapor and condensate compatibilityPTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vaporsN 820.3 FT.18 and N 840.3 FT.18: ATEX-compliant in accordance with ATEX II 2/-G IIB+H2 T3 Gb internal atmosphere onlySpecificationsOperating pressure:1 barConnectors for tube:ID10 mmPermissible media and ambient temperature:5 to 40 °CPump head:PTFEDiaphragm:PTFE-coatedValves:FFPM
€1,910.00*
Gardner Denver Thomas GmbH
Rotary vane pump CRVpro 2
Oil capacity ml:
450
|
Plug type:
EU, UK
|
Suction rate (50/60Hz) L / min.:
38/47
|
Type:
CRVpro 2
The Welch CRVpro pumps are high-performance two-stage vacuum pumps. They impress with their long service life, high reliability and low maintenance requirements. The CRVpro series are the perfect partners for freeze dryers, vacuum concentrators, Schlenklines, glove boxes and vacuum ovens, as well as industrial applications.Cool running operation for less oil consumptionCoated oil case to slow metal corrosionExtended oil change intervals for less maintenance costsDual voltageScope of supply: Every pump is supplied complete with Directorr™ Premium vacuum pump oil, centering rings, clamping rings and motor overload protection.SpecificationsUltimate pressure without gas ballast partial:3 x 10-4 mbarUltimate pressure without gas ballast total:3 x 10-3mbarUltimate pressure with gas ballast total:9 x 10-2mbarConnection:DN 16 KFMotor rating 50/60Hz:0.29/0.3 kWNominal speed 50/60Hz:1440/1720 rpmDimensions (L x W x H):384 x 138 x 211 mmWeight:15 kg
€2,085.00*
25%
Vacuubrand GmbH & Co.KG
Automatic Vacuum Controller CVC 3000
Description:
CVC 3000
Extremely versatile vacuum controller for the laboratory.No configuration required. Just connect and the CVC 3000 will identify all apparatus with VACUU·BUS® VACUUBRAND pumps, vacuum valves, cooling water valves, external sensors, etc. Intuitive menu guidance via graphics display with analogue and digital vacuum readout. Demand-related control of process vacuum, cooling water and venting. Integral sensor made of highly resistant, alumina ceramic provides reliable absolute-pressure measurement. Boiling-point monitoring facility for evaporations*. No more searching for data or data input. Preset for many common vacuum applications, e.g. vacuum ovens, filtration.Specifications:Measuring range:1080 to 0.1mbar (810 to 0.1 torr)Vacuum control range:1060 to 0.1mbar (795 to 1 torr) (depending on vacuum pump)Uncertainty of measurement:
Temperature coefficient: ±1mbar (0.75 torr) (after calibration)
±0.07mbar/K ( ±0.05 torr/K)Control interface:Digital VACUU·BUS®Control connections:1 socket for supply / Vario pump
2 expandable sockets for external sensors / valvesSupply requirements (mains adapter):100-240V 50/60Hz a.c. 1ph.Dimensions (desktop unit, L x W x H):138 x 124 x 115mmWeight (without mains adapter):0.44kg* in conjunction with VACUUBRAND Vario NT pumps
€1,336.00*
€1,770.20*
(24.53% saved)
15%
Vacuubrand GmbH & Co.KG
Chemistry Pumping Units VARIO® select
Dimensions (W x D x H) mm:
306 x 303 x 400
|
Flow rate (50/60Hz) L / min.:
33.3
|
Plug type:
CEE
|
Type:
PC 3001 VARIO® select
|
Ultimate vacuum without / with gas ballast mbar:
2 / 4
|
Weight kg:
8.2
The combination of speed controlled VARIO® chemistry diaphragm pumps and the new VACUU·SELECT vacuum controller makes the VARIO® select chemistry pumps the ideal solution for chemical processes that require precise vacuum, such as rotary evaporation, vacuum drying or vacuum concentration.High chemical resistance and therefore ideally suited for pumping aggressive gases and vapours.Short process times and smooth running due to optimal setting of the pressure via the VACUU·SELECT controller.The VARIO® technology controls the vacuum precisely and efficiently via motor speed.Power consumption, maintenance and noise are exceptionally low.The outlet catchpot and solvent condenser combine to prevent solvent vapor emissions into the lab, allowing for nearly full recovery of solvents.Country-specific power cord versions available on request.
€4,658.00*
€5,480.00*
(15% saved)
20%
Vacuubrand GmbH & Co.KG
Compact Vacuum Controller VACUU·SELECT®
Description:
Benchtop version
|
Dimensions (W x D x H) mm:
191 x 127 x 187
|
Type:
Compact controller VACUU·SELECT®
Fully equipped vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. While the base unit Vacuum Controller VACUU·SELECT®still requires a separate vacuum control valve as an accessory, there is the fully equipped Compact controller VACUU·SELECT®as two-point vacuum regulator with chemical suction line valve.With connected vacuum valve the VACUU·SELECT® automatically detects the boiling point during solvent evaporation and switches to two-point control mode. The graphical user interface offers predefined vacuum processes for all common laboratory applications. Applications, such as desired vacuum and other parameters can also be put together and controlled individually.Interactive, graphic touch display for easy operationTouchscreen display can be operated with safety glovesPredefined vacuum processes for reproducible results and time savings in the laboratoryFully automatic evaporations at the touch of a buttonEasy-to-use application editor for creating your own processesIntegrated help functionIntegrated ventilation valve also for inert gasEthernet/USB (Type A) interfaceEX approval: II 3/- G IIC T4 X Internal Atm. OnlyFully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Available as benchtop or stand version and ready to use due to standard laboratory connections.Scope of delivery: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.SpecificationsMeasuring range:0,1 ... 1080 mbarAccuracy:± 1 mbar / ±1 digit (after adjustment, constant temp.)Housing:Plastic, good chemical resistanceConnection venting valve:Hose nozzle DN 4-5 mmVacuum connection (Compact controllers only):Hose nozzle DN 6/10 mmAmbient temperatue range:10 ... 40 °CDimensions (W x D x H):152 x 127 x 41 mmWeight:0.745 kgPower supply:100 ... 230 V, 50/60 HzIP code / IP code front side:IP 40 / IP 42
€1,936.00*
€2,420.00*
(20% saved)
20%
KNF NEUBERGER GmbH
Mini-Diaphragm vacuum pumps LABOPORT® N 96, chemically-resistant
Depth mm:
156
|
Flow rate l / min.:
7
|
Height mm:
119
|
Plug type:
EU, UK, CH
|
Type:
N 96
|
Type of auxiliary energy:
100 ... 240 V, 50/60 Hz
|
Ultimate vacuum mbar (abs).:
130
|
Weight kg:
1.3
|
Width mm:
75
The Pump combines a high flow rate with a very compact design. Suitable for filtration, SPE, and liquid aspiration using a vacuum. Due to the manual rotational speed control, the pump is quiet, very energy efficient, and can be optimally adjusted in accordance with the application.Easy-to-clean surfaceVery small footprintAdjustable in flowrate due to manual rotational speed controlPTFE-coated diaphragm for use with aggressive/corrosive gases and vaporsSpecificationsUltimate vacuum (abs.):
Operating pressure:130 mbar
2.5 barConnectors for tube:ID 6 mmPermissible ambient temperature:5 ... 40 °CPump head:PPSDiaphragm:PTFE coatedValves:FKM
€374.40*
€468.00*
(20% saved)
20%
Vacuubrand GmbH & Co.KG
Rotary vane pump RZ 2.5, two-stage
Depth:
390 mm
|
Dimensions (WxDxH):
156 x 390 x 240 mm
|
Flow rate (50/60Hz) L / min.:
38.33 / 46.72
|
Height:
240 mm
|
IP code:
IP 40
|
Noise level:
48 db(A)
|
Number of steps:
2
|
Plug type:
CEE
|
Power supply:
230 V, 50 ... 60 Hz
|
Rated capacity:
100 W
|
Type:
RZ 2.5
|
Type of auxiliary energy:
Mains connection
|
Ultimate vacuum:
0.002 mbar
|
Weight:
14.2 kg
|
Width:
156 mm
The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and evacuation of small volumes.Compact design and low weightHigh flow rate even at vacuum levels approaching ultimate vacuumVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, manual
€1,892.00*
€2,365.00*
(20% saved)
20%
Vacuubrand GmbH & Co.KG
Rotary vane pump RZ 6, two-stage
Depth:
420 mm
|
Dimensions (WxDxH):
156 x 420 x 240 mm
|
Flow rate (50/60Hz) L / min.:
95 / 113.27
|
Height:
240 mm
|
IP code:
IP 40
|
Noise level:
50 db(A)
|
Number of steps:
2
|
Plug type:
CEE
|
Power supply:
230 V, 50 ... 60 Hz
|
Rated capacity:
180 W
|
Type:
RZ 6
|
Type of auxiliary energy:
Mains connection
|
Ultimate vacuum:
0.002 mbar
|
Weight:
17 kg
|
Width:
156 mm
The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium to increased gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and drying chambers.High flow rate even at vacuum levels approaching ultimate vacuumHigh water vapor tolerance due to efficient gas ballastVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, manual
€2,424.00*
€3,030.00*
(20% saved)
15%
Vacuubrand GmbH & Co.KG
Screw pumps VACUU·PURE® 10 / VACUU·PURE® 10C (chemically resistant)
Flow rate l / min.:
167
|
Plug type:
EU
|
Type:
VACUU·PURE® 10
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.The chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfaceSpecificationsFinal pressure:5 x 10-3 mbarMax. overpressure:15 mbarPermissible ambient temperature:10 ... 40 °CSuction/pressure connection:KF DN 25Noise emission:55 dBAMotor power:700 WDimensions (W x D x H):269 x 507 x 413 mmWeight:21.1 kgPower supply:230 V, 50/60 HzIP code:IP 20
€6,562.00*
€7,720.00*
(15% saved)
15%
Vacuubrand GmbH & Co.KG
Vacuum measuring instrument VACUU·VIEW
Plug type:
EU, UK, CH, US, AUS, CN
|
Type:
VACUU·VIEW extended
The rough vacuum gauge VACUU·VIEW covers the measuring range from atmospheric pressure down to 0.1 mbar very precisely. The combined rough and fine vacuum gauge VACUU·VIEW extended works in the enhanced range from atmosphere down to 10-3 mbar. The illuminated displays of both vacuum gauges enable comfortable reading.Compact design with integrated sensors for useful setup in laboratory and processChemically resistant, heavy duty vacuum sensors, highly reliable at harsh laboratory conditions even in case of very aggressive chemicalsHigh repeatability and long-term accuracy under all typical conditions reliable and repeatable resultsDisplay with menu driven handling, easy to use e.g. for unit settingsCompatible to gauge DCP 3000 and controller CVC 3000 or VACUU·SELECTThe product is delivered ready for useVACUU·VIEWChemically resistant ceramic diaphragm sensor for measurement in the rough vacuum range. VACUU·VIEW provides gas-independent pressure indication with precise capacitive readout. Highest precision and chemical resistance in the range from atmosphere down to 0.1 mbar, a perfect gauge for all rough vacuum applications.VACUU·VIEW extendedThe heavy duty combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures reliable readings in the wide range from atmosphere down to 10-3 mbar. Precision and chemical resistance in an exceptionally wide range, one gauge covers all applications in the fine and rough vacuum rangeSpecificationsMeasuring range VACUU·VIEW1100 to 0.1 mbar(hPa) / 825 to 0.075 torrMeasuring range VACUU·VIEW extended:1100 to 0.001 mbar(hPa) / 825 to 0.001 torrAccuracy VACUU·VIEW:±1 mbar(hPa)Accuracy VACUU·VIEW extended:±15 % of indicated value in the range from 0.01-5 mbar(hPa)
±3 mbar for 5 mbar(hPa)Vaccum connection:KF DN 16 / hose nozzle DN 6/10 mmDimensions (L x W x H):103 x 62 x 50 mmWeight:190 gPower supply:100-230 V, 50/60 Hz
€858.50*
€1,010.00*
(15% saved)
Vacuubrand GmbH & Co.KG
Accessories and spare parts for rotary vane pumps
Description:
Oil mist filter FO R 8/9/16
|
For:
RE/RZ 8 / RE/RZ 9 / RE/RZ 16
€49.28*
Taiwan Dry Tech Corp.
Accessories for Desiccators, Auto Dry Box
Description:
Shelf for AD-106 (3/4), placement by desiccation unit
€22.26*
LLG Labware
Accessories for LLG-Vacuum desiccator cabinets "Heavy Duty"
Description:
Stopcock for VDC series
€5.20*
Vacuubrand GmbH & Co.KG
Accessories for ME 1, ME 1C and MZ 1C
Description:
Vacuum regulator valve for ME 1
Vacuum regulator valve for ME 1, ME 1C and MZ 1C with manual vacuum control using air bleed. The manometer can be mounted and pivoted in several orientations for optimal visibility. High chemical compatibility (especially with the vacuum regulator valve for ME 1C)
€135.00*
Vacuubrand GmbH & Co.KG
Accessories for Screw pump VACUU·PURE® 10
Type:
Communication Kit, USB to VACUU·BUS converter
€14.90*
Vacuubrand GmbH & Co.KG
Accessories for Vacuum Controller VACUU·SELECT and Measuring instrument DCP 3000
Description:
Analog-I/O-Module VACUU·BUS®
€32.34*
Vacuubrand GmbH & Co.KG
Accessories for VARIO Chemistry Pumping Unit 3002/3003/3004
Description:
Exhaust Vapour Condenser Peltronic®
|
Plug type:
-
Exhaust Vapour Condenser Peltronic®: Fully automatic electronic control of cooling surface temperature and fan
€2,275.00*
BRAND GMBH + CO.KG
Accessory venting stopper for desiccators, PC
Type:
Desiccators
PC. With non-return valve.
€20.70*
Vacuubrand GmbH & Co.KG
Chemistry Diaphragm Vacuum Pumps with ATEX compliance
Connector:
without plug
|
Dimensions (W x D x H) mm:
337 x 287 x 251
|
Number of steps:
2
|
Type:
MZ 2C EX
|
Ultimate vacuum without / with gas ballast mbar (abs.):
12 / 18
|
max. discharge flow m³ / hr.:
1.9
ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump.Outstanding chemical resistance and superior vapor toleranceMainly made of antistatic materialsFlame proof motor with integrated, self-locking overload and excess temperature protection for direct 230V / 50Hz single phase power supplyOverpressure safety relief valves internally and at outletWith separate gas ballast connection part for use of inert gasSafety diaphragm technology with option for inert gas purge and detection of diaphragm breakageATEX compliance:Pump chamber (pumped gases): II 2G IIC T3 XExterior space (pump environment): II 2G IIB T4 X (with inert gas purging) / II 3G IIB T4 X (without inert gas purging)Speed-controlled ATEX VARIO vacuum pumps on request.SpecificationsMZ 2C EXVacuum inlet:Small flange KF DN 16Pressure outlet:Small flange KF DN 16MV 10C EX / MD 4C EXVacuum inlet:Small flange KF DN 25Pressure outlet:Kleinflansch KF DN 16MZ 2C EX+AK+EK / MD 4C EX+AK+EKVacuum inlet:Small flange KF DN 16Pressure outlet:Tubing nozzle DN 8-10 mmCooling water connection:2 x tubing nozzle DN 6-8 mm
€5,400.00*
KGW Schieder GmbH
Chemistry pump device GP3
Type:
Chemistry pump device GP3
The mobile chemistry pump stand has a cold trap and a pump fork with a separate aeration cell. The pump fork has four independently switched vacuum valves and additionally four independently switched aeration valves. So can every sample holder get individually evacuated or aerated without affecting the vacuum of the other sample holders. You can also connect an electronic vacuum gauge. The vacuum pump is not included in the delivery.Small flange KF-NW 16 with vacuum manometerGL18 glass screw thread10 mm PTFE-olivePE-table plateAluminum-rackFour lockable guide rollsSpecificationsCapacity with cold trap:2000 mlCondensate capacity of cold trap:max. 250 ml
€5,197.41*
Vacuubrand GmbH & Co.KG
Chemistry Pump Units and Vacuum Systems
Connector:
CEE
|
Dimensions (W x D x H) mm:
243 x 418 x 457
|
Type:
PC 510 select
|
Ultimate vacuum without / with gas ballast mbar (abs.):
7 / 12
|
max. discharge flow m³ / hr.:
2.0 / 2.3
Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.100% oil-free pumping of gasesgas ballast as standard for working with condensable vapoursgood vacuum even with gas ballasthigh vapour tolerance for water and solventslong service life, low maintenanceFeatures:2AK: Inlet and outlet separatorAK + EK: Inlet separator, exhaust vapour condenserPC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum portPC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum portPC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum portsCharacteristics and applications: Without vacuum control: MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outletMZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.With vacuum controller: PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.Country-specific power cord versions available on request.
€2,860.00*
Vacuubrand GmbH & Co.KG
Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic®
Description:
PC 3001 VARIO® select EKP
|
Dimensions (W x D x H) mm:
300 x 370 x 400
|
Flow rate (50/60Hz) L / min.:
33.33
|
Plug type:
-
|
Ultimate vacuum mbar:
2
|
Weight kg:
11.8
The PC 3001 VARIO® select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The pump's variable motor speed responds to demand, reducing energy waste and mechanical wear, ensuring unrivalled service life for the diaphragms.For solvent evaporation, the controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process controlUser-defined applications with simple drag-and-drop editing.Small footprint and low weight for flexible use in the laboratoryThe inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pumpThe included emission condenser Peltronic® works without any cooling media like water or dry ice.Scope of supply: Chemistry pumping unit PC 3001 VARIO® select completely mounted with conderser Peltronic®, ready for use, with manual.Without mains cable, please order separately.SpecificationsCooling power at 21 °C:50 WAmbient temperature range:10 ... 40 °CPreset cooling temperature:10 °CMaterials in contact with media:PP, PFA, ETFE/ECTFE, borosilicate glassPower supply:100 ... 230 V, 50/60 HzDimensions (W x D x H):175 x 179 x 392 mm
€7,620.00*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Vacuum technology, drying & dry storage
With decades of experience in this field, you will find a wide range of different vacuum pumps such as piston, diaphragm and rotary vane pumps and the matching vacuum gauges to go with them, as well as the freeze dryers and desiccators for dehumidification and dry storage. Supplementary accessories such as cold traps with Dewar flasks and Woulff flasks round off the range for this area of application.
Your watch lists
Loading...