Our Top-Sellers
Analytical balances with three automatic sliding doors, which can be opened and closed using sensors. Thanks to the memory function, the balance stores how far the sliding doors have been opened. The multifunctional weighing plate (only for models with readability 0.01 mg) minimises the effect of air currents in the weighing chamber and therefore significantly improves the stabilisation time and repeatability. In addition samples, sample paper, PCR tubes and microcentrifuge tubes can be easily fixed and weighed.OLED displayIntegrated ioniserAdjustable, internal draft shieldSingle-cell generation for fast and stable weighing resultsNavigation pad for super quick navigating through the menusAutomatic internal adjustment in the case of a change in temperature ≥ 1 °C or time controlled every 4 h, guarantees high degree of accuracy and makes the balance independent of its location of useThe minimum weight of sample can be manually stored in the balance or automatically calculated, with warning message when the weighing is below this valueDosage aid: High-stability mode and other filter settings can be selectedSimple recipe weighing and documenting with a combined tare/print functionAutomatic data output to the PC/printer each time the balance is steadyUSB data interfaces and RS-232Scope of supply:Analytical balance, protective working cover, universal mains adapter
Sign up
Available as hand or motor liftClear digital display for monitoring the current values and separate button to display the set valuesTwo separate operating knobs for adjusting the rotation speed and heating temperature with LED ring light system for activity indicationActivated lock feature prevents inadvertent adjustmentsResidual heat indicator when >50 °CStandby button stops all functions and lifts the evaporator flask out of the heating bath on motor lift modelsErgonomically optimized heating bath handles sit securely in your handEasily adjust immersion depth up to 155 mm and the tilt angle of the evaporating flask from 20° to 80°Grease-free operation thanks to innovative sealing technologyVentilation cap with PTFE inlet and free of ground joints. Optionally available with replenishment valveOptional cable extension. The operating panel can be detached for use outside closed fume hoodsScope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.Available as hand or motor liftClear digital display for monitoring the current values and separate button to display the set valuesTwo separate operating knobs for adjusting the rotation speed and heating temperature with LED ring light system for activity indicationActivated lock feature prevents inadvertent adjustmentsResidual heat indicator when >50 °CStandby button stops all functions and lifts the evaporator flask out of the heating bath on motor lift modelsErgonomically optimized heating bath handles sit securely in your handEasily adjust immersion depth up to 155 mm and the tilt angle of the evaporating flask from 20° to 80°Grease-free operation thanks to innovative sealing technologyVentilation cap with PTFE inlet and free of ground joints. Optionally available with replenishment valveOptional cable extension. The operating panel can be detached for use outside closed fume hoodsScope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
These magnetic stirrers are designed for safety and versatility across research, academic and industrial settings. They offer powerful mixing with premium hardware and software to support users safely and reliably.SmartRate™ enables to select fast or slow temperature and speed ramp ratesSmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interfaceScope of supply: Hotplate stirrer, temperature sensor Pt 1000, sensor holder kit
The next generation of our top-selling IKA/LLG-Labware co-branded LLG-RCT Standard magnetic stirrer. Trusted and reliable quality!Digital controlled speed and temperatureClearly arranged LED displayDigital display of set safety temperature limitHot top indicator, hot surface warning to prevent burnsAdjustable safety circuit of heating plate temperatureDigital error code displayConnection for external PT1000 temperature probe. The control accuracy with temperature sensor is ±1 °CAluminium hotplate for optimal heat transferEnhanced safety due to improved heat control technologyUSB interfacePowerful motorImproved magnetic couplingSupplied with housing protection coverTested acc. to DIN EN IEC 61010-1Scope of supply: Magnetic stirrer, temperature probe PT1000, screwdriver, protective cover, mains cable (H11)
High-quality and cost-efficient UV/VIS spectrophotometer for pharmaceutical, biochemical, and clinical lab applications. Suitable for different measurement types such as kinetics, wavelength scans, quantitative analysis, multi-wavelength, and DNA/Protein analysis. LLG-uniSPEC 4 is ideal for complex measurements e.g. required for quality controls.LLG-uniSPEC 4 features a small band width and a high wavelength accuracy. The device can store and save 200 calibration curves. A pre-adjusted lamp design allows a fast and easy lamp replacement. Both lamps can be individually turned on/off to extend the durability. The device can be used either as stand-alone unit or can be operated via a PC by using the supplied software.Single beam system, grid with 1200 lines/mmSilicon photodiode detectorParallel port for printer outputUSB port4 position cell holder (10 mm) includedAdditional cell holders optionally availableLCD displayDeuterium and tungsten lampAutomatic wavelength adjustmentScope of supply: Spectrophotometer, software for connection to PC, 4 glass cells, 2 quartz cells, protective coverSpecificationsLLG-uniSPEC 4Optical System:Single beam, grating 1200 lines/mm, silicon photodiode detectorWavelength range: Bandwidth:190 ... 1100 nm 1.8 nmWavelength accuracy: Wavelength repeatability: Wavelength setting:±0.3 nm 0.2 nm automaticPhotometric accuracy: Photometric repeatability: Photometric range:±0.3 % T 0.2 % T -0.3-3 A, 0-200 % T, 0-9999 CStability: Stray light:±0.002 A/h at 500 nm ≤0.05 % T at 220 nm, 360 nmData output: Printer port: Display:USB port parallel port 320 x 240 Dots LCDStandard cell holder: Lamps:4-position 10 mm cell changer D2 lamp and W lamp
High-precision measuring device with Peltier temperature control for demanding applications in the food, beverage, and chemical industry. SMART temperature stability, RFID user identification, and application-specific, pre-programmed methods simplify routine analyses. Measurements can be performed quickly and reliably in Brix, refractive index (RI), or up to 100 user-defined scales.Flat prism surface facilitates cleaningWide beam scan for non-homogeneous samplesBrix precision to three decimal placesData memory for over 8000 readingsMenu with PIN protectionDual display function: display of Brix or RI values alongside the equivalent sucrose SG resultUSB (A), USB (B), and Ethernet interfaceOutput as secure PDF possibleUSB "Back-up & clone"Remote access for diagnostics and maintenanceSupports FDA Regulation 21 CFR Part 11High-resolution 7" HD touchscreen display
Repetitive pipette with colour touch display and automatic tip size recognition. The automatic tip size recognition of the PD-Tips II, with patented coding on the piston, automatically displays the tip size after inserting the tip. By inserting a new PD-tip of the same size, all instrument settings are maintained.Multi-dispensing, auto-dispensing, pipetting and favoritesTouchscreen operation with intuitive menu navigation and integrated help functionImportant functions and parameters visible at a glanceAutomatic tip ejection by the press of a buttonErgonomically arranged STEP buttonVariable volume adjustment from 1.0 µl to 50 mlUSB-C connection for quick charging by cableInductive charging with optional charging standCompatible third party tips can also be usedScope of supply:Repetitive pipette, universal AC adapter (for Europe, UK, USA, Japan, Australia and New Zealand), Li-Ion battery, USB-Type C cable, shelf/rack mount, sample PD-Tips II, operating manual, performance certificate
Die Kombination aus drehzahlgeregelter VARIO® Chemie-Membranpumpe und dem neuen Vakuum-Controller VACUU·SELECT macht die Chemie-Pumpstände VARIO® select zur optimalen Lösung für chemische Prozesse, die präzises Vakuum erfordern wie z.B. Rotationsverdampfung, Vakuumtrocknung oder Vakuum-Konzentration.Hohe Chemiebeständigkeit und damit beste Eignung für das Fördern von aggressiven Gasen und DämpfenKurze Prozesszeiten und reibungsloser Ablauf durch optimalen Einstellung des Prozessdrucks über den VACUU·SELECT ControllerDie VARIO®-Technologie regelt das Vakuum punktgenau und effizient über die MotordrehzahlEnergieverbrauch, Wartungsaufwand und Geräuschemission sind daher verschwindend geringDer saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück, während der sehr kompakte, druckseitige Emissionskondensator die nahezu hundertprozentige Rückgewinnung von Lösemitteln ermöglichtLänderspezifische Steckervarianten auf Anfrage erhältlich.Die Kombination aus drehzahlgeregelter VARIO® Chemie-Membranpumpe und dem neuen Vakuum-Controller VACUU·SELECT macht die Chemie-Pumpstände VARIO® select zur optimalen Lösung für chemische Prozesse, die präzises Vakuum erfordern wie z.B. Rotationsverdampfung, Vakuumtrocknung oder Vakuum-Konzentration.Hohe Chemiebeständigkeit und damit beste Eignung für das Fördern von aggressiven Gasen und DämpfenKurze Prozesszeiten und reibungsloser Ablauf durch optimalen Einstellung des Prozessdrucks über den VACUU·SELECT ControllerDie VARIO®-Technologie regelt das Vakuum punktgenau und effizient über die MotordrehzahlEnergieverbrauch, Wartungsaufwand und Geräuschemission sind daher verschwindend geringDer saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück, während der sehr kompakte, druckseitige Emissionskondensator die nahezu hundertprozentige Rückgewinnung von Lösemitteln ermöglichtLänderspezifische Steckervarianten auf Anfrage erhältlich.
Digital disperser for fast homogenizing, emulsifying, suspending, as well as mixing biological samples, pharmaceuticals, cosmetics, and food. Comfortable rotating knob allows precise electronic speed setting and control up to 25000 min-1.Powerful, brushless motorRobust, rugged housingBright, intuitive LED displayUser-friendly, clear control panel shows speed parameters at a glanceWith smooth startTimer adjustable up to 99 h 59 minMaximum safety in daily laboratory operation thanks to overtemperature alarm and motor failure alarmSpecial alarm indicates improper installation or absence of a dispersion toolQuick and easy dispersing tool installationLED indicator system and maintenance timer provide information on the time remaining until maintenance and allow prompt gasket replacementScope of supply: Disperser, stand with double rod, dispersing tool D20-S20C-P-R20S, tool disassembly kit
Portable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environmentsScope of supply: Meter with LE703 sensor, carrying case
Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuousCompact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuous
Basic pH/mV laboratory instrument for all tasks where reliable, accurate readings are required quickly and easily. With large LCD segment display and easy-to-read keyboard. The AutoRead function ensures correct and repeatable measurement results. A built-in timer reminds the user of periodical calibration.Scope of supply: Laboratory instrument with DIN connection, mains power adapter, stand, SenTix® 81, 3 mol/l KCl, buffer 4.7/10.01
Easy-to-use, respirometric measuring system for determining the biological oxygen demand (BOD). The method is based on changes of pressure in a closed system using measuring heads attached to the sample bottles. The BOD can be determined simultaneously in up to 6 or 12 samples.No dilution of the sample requiredDirect reading of the BOD, the time course and the intermediate values on the graphical display of the measuring headsInput of the used sample volume directly at the measuring headMonitoring time between 1 and 7 daysPermanent display of the current status at each measuring headColoured measuring heads with adjustable, numerical sample identificationScope of supply: OxiTop®-i IS 6: 6 x measuring heads (3 x blue, 3 x grey), 6 x sample bottles PF600, 6 x rubber quivers, overflow measurement flasks, 6 x stirring rods, stirring rod remover, stirring platform SI 6OxiTop®-i IS 12: 12 x measuring heads (6 x blue, 6 x grey), 12 x sample bottles PF600, 12 x rubber quivers, overflow measurement flasks, 12 x stirring rods, stirring rod remover, stirring platform SI 12An incubator is required to operate the OxiTop®-i IS. Please order separately.Hazardous Substance DataGHSH-SatzH290, H314P-SatzP280, P301+P330+P331, P305+P351+P338
Developed for the toughest cleaning tasks, these devices combine the most advanced technology with proven quality and are therefore ideal for applications where high cleanliness and maximum reliability are essential. They effortlessly cope with even the most stubborn dirt such as oils, greases, abrasive pastes or organic contaminants and deliver perfect results. Especially suitable for continuous use.With welded tanks made of cavitation-resistant stainless steelDynamic mode for more intensive cleaning with higher cleaning powerSweep and Pulse mode alternately for homogeneous and powerful cleaningEco mode for gentle cleaning with quieter operationWith stainless steel drain tap on the sideAdjustable temperature from 30 to 80 °CTimer from 1 to 30 min or continuous operationAutomatic safety switch-off with wake-up functionDry-run detectionScope of supply: Ultrasonic bath, stainless steel lid, mains cable (2 m), manual
Without heating. The MIXSTER is a universal and particularly compact mixing device with magnetic drive, which can be expanded to a multi-position magnetic stirrer with a wide range of applications by connecting up to 30 devices in series. The stirring points can be controlled either separately or simultaneously (leader-follower principle).Using the optional attachments, each magnetic drive can be converted into a vortexer, orbital shaker or 9 stirring position magnetic stirrer for small volumes (8 to 60 ml).Intuitive and chemically resistant 360° LED glass display for conveying all information without an alphanumeric displayIntegrated beaker detectionSignificant improvement in the mixing result for samples that are difficult to mix by changing the direction of rotation at definable time intervals (reverse function).Viscosity changes can be observed and displayed as a percentage by showing either the speed or the power required for stirringSuitable for operation in incubators up to 40 °CCleaning under the tap possibleScope of supply: 2 x magnetic stirrer MIXSTER, 1 x power supply with adapter, 2 x stirring bar IKAFLON 25 round
Dispersing heads, plastic: Autoclavable. Dispersing heads, stainless steel: Ultimate fineness: emulsions 1 to 10 µm and suspensions 5 to 25 µm, sterilisable by all methods. ST tools are recommended for use with tissue and other fibrous materials.
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.Thin - very comfortable to wearExcellent tactile sensitivity - similar to latexTried and tested quality product made of nitrileExcellent resistance to skin irritants in foodstuffsSpecially formulated for a more resilient gloveFor single use in applications with an increased need for safety when handling chemicalsFree from phthalates / softeners and allergenic latex proteinsPowder-freeEasy to wear and particularly skin-friendly through special finishing processColour: Lavender BlueSuitable for areas subject to HACCP standardsCat. III. AQL 1.5According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.
Recommendations
The next generation of our top-selling IKA/LLG-Labware co-branded LLG-RCT Standard magnetic stirrer. Trusted and reliable quality!Digital controlled speed and temperatureClearly arranged LED displayDigital display of set safety temperature limitHot top indicator, hot surface warning to prevent burnsAdjustable safety circuit of heating plate temperatureDigital error code displayConnection for external PT1000 temperature probe. The control accuracy with temperature sensor is ±1 °CAluminium hotplate for optimal heat transferEnhanced safety due to improved heat control technologyUSB interfacePowerful motorImproved magnetic couplingSupplied with housing protection coverTested acc. to DIN EN IEC 61010-1Scope of supply: Magnetic stirrer, temperature probe PT1000, screwdriver, protective cover, mains cable (H11)
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
The spectrophotometer NANOCOLOR® Advance, with Reference Detector Technology (RDT), provides precise and reliable measurement and can be used in the entire spectrum of water and wastewater analysis. It can also be used mobile due to its rechargeable battery. With an additional 860 nm LED, the device determines the nephelometric turbidity during each measurement of a tube test and warns of incorrect results.Backlit colored 5" display with touch screenFully automatic cuvette recognition via the integrated 2D barcode scannerEvaluation of NANOCOLOR® tube tests (16 und 24 mm), standard tests (10, 20, 40, 50 mm) and VISOCOLOR® Powder PillowsOver 200 pre-programmed tests and special methods, 99 fully programmable methods, absorbance, transmission, factor, kinetics, 2-point calibration, scan, nephelometric turbidity measurement 1-1000 NTUScope of supply: Spectrophotometer NANOCOLOR® Advance, manual (quick start guide), protective covering, power supply unit with country specific adapters, USB stick, calibration cuvette, certificate, cleaning clothSpecificationsOptical system:Single beam photometer with grating monochromatorWavelength range:340 ... 800 nmWavelength accuracy:± 2 nmWavelength reproducibility:± 0.1 nmSpectral bandwidth: 4 nmPhotometric range:± 3.0 A in the range 340 ... 800 nmScattered light: 0.5 %Light source:Halogen lampData memory:1000 measured values / spectraInterfaces:2 x USB (Host), 1 x USB (Function)Dimensions (W x D x H): 280 x 325 x 130 mmWeigth: 3.8 kgPower supply:110 ... 240 V, 12 V 3A DCProtection class:IP67
The Hei-PLATE Mix'n'Heat Core series with heating consists of models Hei-PLATE Mix'n'Heat Core, Hei-PLATE Mix'n'Heat Core+ and Hei-PLATE Mix'n'Heat Core+.With patented Kera-Disk® top plate made of anodized aluminum and fireproof aluminum die cast housingFastest heating times thanks to 800 W (at 230 V), the built in PID controller guarantees precise control without overshooting the temperatureSimple operating conceptLarger distances between the heating plate and knobs for additional protection against burnsLiquids are safely dissipated from the deviceA carrying support on the underside ensures safe transportConnections on the back are protected by a flapWith connection for optional temperature sensor Pt 1000Compatible with EKT Hei-Con contact thermometers for external controlling and display of actual temperature valuesScope of supply: Hei-PLATE Mix'n'Heat Core+, PT 1000 (V4A) incl. clamping system, silicone protective cover
Refrigerated circulators are suitable for internal and external standard temperature applications as well as routine work in laboratories and industry.Bright, white, easy-to-read displayEasy pump switching between internal and external circulationExternal pump connections (M16x1)USB connectionSpace-saving cooling coil design yields more usable space in the bath tankStainless steel bath tank including bath lid and drain tapRemovable ventilation gridRefrigeration unit without lateral ventilation openings2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1Refrigerated circulators are suitable for internal and external standard temperature applications as well as routine work in laboratories and industry.Bright, white, easy-to-read displayEasy pump switching between internal and external circulationExternal pump connections (M16x1)USB connectionSpace-saving cooling coil design yields more usable space in the bath tankStainless steel bath tank including bath lid and drain tapRemovable ventilation gridRefrigeration unit without lateral ventilation openings2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1
Available as hand or motor liftClear digital display for monitoring the current values and separate button to display the set valuesTwo separate operating knobs for adjusting the rotation speed and heating temperature with LED ring light system for activity indicationActivated lock feature prevents inadvertent adjustmentsResidual heat indicator when >50 °CStandby button stops all functions and lifts the evaporator flask out of the heating bath on motor lift modelsErgonomically optimized heating bath handles sit securely in your handEasily adjust immersion depth up to 155 mm and the tilt angle of the evaporating flask from 20° to 80°Grease-free operation thanks to innovative sealing technologyVentilation cap with PTFE inlet and free of ground joints. Optionally available with replenishment valveOptional cable extension. The operating panel can be detached for use outside closed fume hoodsScope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.Scope of supply: Hei-VAP Core with hand lift and vertical glassware set G3, Vacuum controller Hei-VAC Control, Vacuum pump Rotavac Valve Tec, Tube-Set
Alkaline disinfectant cleaner for special dishwashing machinesSuitable for medical, biological and chemical laboratories as well as laboratories in the food industryRemoves blood, protein-containing residues, food residues, chemicals and much more.Increased defoaming effect at temperatures above 30°.Ingredients > 25% silicates, emulsifiers, chlorine carrier (active chlorine
The laboratory water bath with the highest degree of comfort is available in six model sizes. The operating concept impresses with its intuitive and convenient menu navigation. A particular highlight: Thanks to the personalisable remote viewing through the CustomView, you always have an eye on the important information.The modular concept of this modern water bath guarantees maximum flexibility. If the application calls for it, a circulation pump, cooling unit, shaking device and test tube holder or insertable rack can easily be retrofitted.Standard equipment: Stainless steel gable cover, Drain system, Timer
Vortex shaker especially for short time operation (Touch function) or continuous operation.
The Rocking shaker Duomax is suitable for the modular Incubator 1000 and is recommended for applications which require variable temperatures. With 2-dimensional tilting movement, suitable for petri dishes, culture bottles, erlenmeyer flasks and all standard vessels.An overtemperature sensor preventatively shuts off the unit in a dangerous heat-up situation, particularly valuable for you in case of continuous operationInsulated drive system prevents any heat-up coming from the motor and consequently thermal damage to your sampleDesigned with a low center of gravity which prevents gliding at high speed, even on a damp surfaceSet and continuously adjust the variable speed on the analog control knob, suitable for all standard vesselsAn analog process timer (max. 120 min) allows for unattended operation. When the set time has elapsed, an acoustic alarm will sound and the operation stops
Glove for laboratory work and product protection with high tactility and excellent comfort and ergonomic fit.Food-safePowder-free, latex-freeWith rolled edgeAQL 0.65Cat. III
High-performance, economical balances with high accuracy and repeatability for applications in laboratories, industry and education. For basic weighing, parts-counting, percent weighing, dynamic weighing and density determination.2 line, backlit LCD display4 quick keys enable the most common weighing modesDraftshieldUSB and RS 232 interface for data exchange with PCs and PLCsUser-selectable span calibration pointsReal-time clock with GLP/GMP dataCast metal lower housing, removable stainless steel weighing panIntegrated weigh-below-hookAuto-tareMany weighing units selectable, a custom unit can be definedModels with removable side draftshield doors and static removal bar made from ABSOverload, underload and stability indicator4 menu languagesPlease note:Models with extra code M are approved instruments according to EN 45501; OIML R76. Models with extra code D are with dual range function.
Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuousCompact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuous
With recirculation valve and calibration mechanism.Quick, easy and precise volume adjustment due to interior scalloped track and practical screw mechanismInnovative recirculation valve avoids reagent wasteNo drips after tube has been cappedEasy calibration adjustmentHigh-quality materials (PTFE, PFA, FEP, borosilicate glass, platinum-iridium) ensure good chemical resistance to most acids, solvents and basesA positive displacement plunger with PFA seal minimizes the crystallization of liquids and therefore the possibility of the plunger jammingEasy to dismantle for cleaning, no tools necessaryCan be rotated 360° on bottleDE-M markedWith screwable discharge valveScope of supply:Bottle top dispenser, thread adapter GL 25, GL 28, GL 32, GL 38, S 40 (2 - 10 ml), thread adapter GL 32, GL 38, S 40 (25 - 100 ml), telescopic filling tube, recirculation valve, operation manual, quality certificate, mounting tool
High performance Unichiller with Pilot ONE controller for standard applications. The Unichiller offers cooling powers up to 2,5 kW. The chiller is ideal for standard cooling applications in the laboratory or in industry. The energy efficient function of the chiller reduces the water consumption for many applications, helping to protect the environment and reducing operating costs. The models are fitted with the Pilot ONE controller including 5.7" colour touch screen and 2 x USB, Ethernet and RS232 connections. P-models include circulating pumps with a high discharge pressure for applications with high pressure drops.Cooling power up to 2.5 kWAir- and watercooled modelsCompact, robust stainless steel housingsFitted with wheels for easy handlingOptional heating up to +100°CPower supply:230 V, 50/60 Hz
Stores a high quantity of samples eliminating the need for multiple racksAlphanumeric grid for quick location and retrieval of tubesSturdy, lightweight material for easy transport
With standard ground joint and white inscription. Acc. to DIN EN ISO 4797.
Separating funnel acc. to Squibb with PTFE stopcock.DIN ISO 4800With standard ground joint and stopperWhite graduation
Space-saving, rectangular wide mouth bottle with sturdy, uniform wall construction. Ideal for easy filling, storage or transport of liquids, powders and granulates.With screw capVery good chemical resistance to most acids, bases and alcoholsAutoclavableLeak-proof
LAB. FULL. SUPPLIED
We provide a full range of laboratory supplies, expert advice, and fast delivery at competitive prices.
The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.Thin - very comfortable to wearExcellent tactile sensitivity - similar to latexTried and tested quality product made of nitrileExcellent resistance to skin irritants in foodstuffsSpecially formulated for a more resilient gloveFor single use in applications with an increased need for safety when handling chemicalsFree from phthalates / softeners and allergenic latex proteinsPowder-freeEasy to wear and particularly skin-friendly through special finishing processColour: Lavender BlueSuitable for areas subject to HACCP standardsCat. III. AQL 1.5According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorForced air circulationFan speed adjustableSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuges incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid, up to 24 microcentrifuge tubes can be centrifuged and cooled with each run.
3 adjustable Eppendorf Research® plus pipettes per pack, choice of 3 packs. Special "mL" large-volume pack with up to 10ml nominal volume, ideal for pipetting cell culture media. Ready-to-use: delivered with matching Eppendorf pipette tips for ultimate user comfort and precision!Option 1: 0.5-10µl, 10-100µl, 100-1,000µl + 3 reusable epT.I.P.S.® boxes with 96 pipette tips each.Option 2: 2-20µl, 20-200µl, 100-1,000µl + 3 reusable epT.I.P.S.® boxes with 96 pipette tips each.Option 3: 100-1,000µl, 0.5-5ml, 1-10ml with samples of matching pipette tips.
The LLG Premium Line is our best selection of high quality and proven devices from our top suppliers.The meter pH 3110 Set SM PRO is ready-to-use for portable pH and Redox measurement.Convincing qualityWith proven, universal pH electrode Sentix 41Robust with sturdy housing made of ABSAdditional protection due to protective cover SM Pro made of siliconeWaterproof according to IP 67Excellent functionality and best user comfortReady-to-use in carrying caseLarge, clear LCD segment display, easy to read thanks to high contrastClear keyboard with only 6 keys made of a gap-free silicone matKeyboard can be operated with gloves due to tactile feedbackEasy to cleanHighest safetyAutomatic AutoRead function for reproducible and reliable readings3-point calibration with technical or DIN/NIST buffersIntegrated calibration timer for reminding to calibrate regularlyScope of supply: pH meter pH 3110 ProfiLine, pH electrode Sentix 41, buffer STP 4 / STP 7 (50 ml each), protective cover SM Pro, KCL solution, measuring beaker (50 ml), electrode holder, carrying case, 4 x AA batteries
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
The Welch CRVpro pumps are high-performance two-stage vacuum pumps. They impress with their long service life, high reliability and low maintenance requirements. The CRVpro series are the perfect partners for freeze dryers, vacuum concentrators, Schlenklines, glove boxes and vacuum ovens, as well as industrial applications.Cool running operation for less oil consumptionCoated oil case to slow metal corrosionExtended oil change intervals for less maintenance costsDual voltageScope of supply: Every pump is supplied complete with Directorr™ Premium vacuum pump oil, centering rings, clamping rings and motor overload protection.
häberle Laboratory supplies
häberle tips
The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.Thin - very comfortable to wearExcellent tactile sensitivity - similar to latexTried and tested quality product made of nitrileExcellent resistance to skin irritants in foodstuffsSpecially formulated for a more resilient gloveFor single use in applications with an increased need for safety when handling chemicalsFree from phthalates / softeners and allergenic latex proteinsPowder-freeEasy to wear and particularly skin-friendly through special finishing processColour: Lavender BlueSuitable for areas subject to HACCP standardsCat. III. AQL 1.5According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.
ISO 3819. With spout. From 25 ml with graduation. With easy-to-read scale and large labelling field for easy marking. In fired-on, highly durable white ceramic. Due to the uniform wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral as per USP, EP and JP. With retrace code (Batch Identification, for all) except 5 ml, 10 ml and 25 ml. Certificate available via the Internet. Autoclavable.
Serological pipettes from LLG are ideally suited for sterile serological and cell culture applications. Easy to read graduation scales facilitate volume measurement and dosing. All LLG serological pipettes are plugged, sterile, pyrogen-free and have an increased volume capacity through extra graduations.1 ml, 5 ml, 10 ml, 25 ml and 50 ml pipettes contain a bi-directional secondary graduation scale for precise dosingColour coded ringmark for easy volume identificationSingle packed in easy-to-open plastic/paper packagingAlso available as short-pipettes (5 ml, 10 ml and 25 ml) or wide-mouth pipette (10 ml)For research and development only.
DIN EN ISO 835, DIN 12699Conformity-certifiedWith batch date identificationCalibrated to deliver (EX)Ring marks and graduations in permanent blue enamel
These innovative protective spectacles are designed to perfectly fit the face. Their flexible side arms with variable inclination can be individually adjusted, while the integrated Softflex zone ensures outstanding wearer comfort for all head sizes.The extremely soft Softflex nose piece ensures that even when worn for long periods, spectacles are comfortable, do not press on sensitive areas and remain firmly in place. Soft ear pieces and the Softflex zone at the temples ensure a secure fit in any situation.Coating of the lens, uvex supravision excellence : Scratch-resistant and non-fogging on the inside, while the outside is extremely scratchproof, resistant to chemicals and very easy to clean thanks to nano-technology.
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Conformity certified with batch ID.DIN EN ISO 1042With standard ground joint and PE stopperBlue ring mark and inscription
Portable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environmentsScope of supply: Meter with LE703 sensor
Acid treated for high wet-strength and chemical resistanceLarge nominal particle retention rating of 22 µmFast filtration speed (Herzberg filtration speed 39 s)High purity (0.015 % ash maximum)Compatible with Büchner funnel or Hirsch funnel applications
Cost-effective syringe filters for filtration of a broad variety of solvents, as well as aqueous, or inorganic solutions. These syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, and food and beverage testing laboratories.Robust polypropylene housingMultifunctional syringe filters with female Luer-Lock inlet and male Luer-Slip outletSuitable for all syringes with Luer connectionHydrophilic membrane for aqueous and polar organic solutions with low protein binding capacityEspecially suitable for sterile filtration of solutions and media in cell culture, as well as for ion chromatography and organic acidsSterile filters individually packed in a hard blister package and dispenser box.For research and development only.
High-performance dispersing instrument for volumes from 1 to 2000 ml (H2O) with digital speed display. It offers a wide speed range from 3000 to 25000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements adds versatility. Applications ranges from homogenizing waste water samples, use in laboratory reactors, dispersion tasks under vacuum/pressure and sample preparation in medical diagnostics.Digital speed displayElectronic speed controlElectronic overload protectionStainless steel dispersing elements can be cleaned quickly and easilyPlastic disposable dispersing elements are available in two sizesError code displayQuiet operationDispersing heads must be ordered separately.
With variable volume and calibration mechanism.Quick, easy and precise volume adjustment due to interior scalloped track and practical screw mechanismNo drips after tube has been cappedEasy calibration adjustmentHigh-quality materials (PTFE, PFA, FEP, borosilicate glass, platinum-iridium) ensure high chemical resistance aganinst most acids, solvents and basesA positive displacement plunger with a PFA seal minimizes the crystallization of liquids and thus the clogging of the plungerEasy to dismantle for cleaning, no tools necessaryDevice can be rotated 360° on bottleDE-M markedWith screwable discharge valveScope of supply:Bottle top dispenser, thread adapter GL 25, GL 28, GL 32, GL 38, S 40 (2 - 10 ml), thread adapter GL 32, GL 38, S 40 (25 - 100 ml), telescopic filling tube, mounting tool, operation manual, quality certificate
LLG-Inline filters with PP housing. The PTFE membrane is particularly suitable for filtration of aggressive chemicals, including acids and non-aqueous solutions. Also ideal for clarifying filtration of organic solutions, sterile filtration of gases, as well as sterile aeration and deaeration.Multiple autoclavable at 121 °C for 20 minutes at 2 bar, max. 3 cyclesHigh throughput with low pressure dropFor air and gases in both directions
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)SingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Robust density meter for mobile use with easy handling and user guidance. Ideal for rapid and accurate routine measurements in quality assurance, incoming and outcoming goods inspection.Automatic sampling pumpAvailable measurement scales: API, °Baumé, Brix, density, Ethanol, H2SO4, proof (US and IP), °Plato, specific gravity, user-defined concentrationAutomatic temperature compensationMemory for up to 1100 resultsBacklit measuring cellAdjustable limits with customisable colours in the displayBright display with good readabilityPower supply: Removable and rechargeable Li-Ion batteries
Very compact titrator for simple routine titrations. Thanks to the standard methods the creating of methods is no longer required. Just load the method and press the start button. GLP compliant results with titration curve can be documented on a connected printer or USB-memory stick.Colour TFT display, excellent readability even from the sideStorage of results as PDF and CSV on USB stickPre-installed standard methodsMeasuring input electrode: pH/mV-input with DIN or BNC socketMeasuring input Pt 1000/NTC 30: Temperature sensor connection for resistance probes Pt 1000 or NTC 30 (socket: 2 x 4 mm)Interfaces: 1 x USB A und 1 x USB-B, 2 x RS-232-CDosing units: 20 ml or 50 ml dosing unit, interchangeableConformity: ISO 8655, part 6Following titration modes are possible:Titrations to pH, mV and µA endpoint (2 EP)Titrations to one equivalence point (pH und mV) with dynamic or linear titration additionManual titrations with the controllerDosing tasksNumber of methods: 5Typical applications for the TitroLine® 5000 are:Salt content in foodstuffs (cheese, soy sauce, ketchup)Total acidity in wine and beveragesNitrogen according to KjeldahlChloride in drinking water and other samplesAlkalinity (p + m-value)FOS/TACScope of supply: Basic unit, with ready to use assembled 50 ml dosing unit TZ 3160 with hoses, fittings and titration tip, controller TZ 3880, titration clamp Z 305, stand rod TZ 1748 magnetic stirrer TM 50 and power supply 100-240 V, pH combination electrode A 7780 NTC30 DIN N, buffer set
The Transferpette® S is available with fixed or adjustable volume. Low operating forces and a short stroke ensure relaxed pipetting, even during long pipetting series.One-hand operation for right- and left-handed usersVolume-change protectionEasy Calibration technology: Calibration without toolsUniversal tip coneCompletely autoclavable at 121 °CColor code on volume adjustment wheel, shaft and volume-change protectionDE-M markingScope of supply: Transferpette® S type adjustable volume, performance certificate, shelf/rack mount, silicone grease
With robust tuning fork weighing system for fast display of the weight value, accurate dosing and high mechanical load capacity.PNJ models with internal calibration function and guaranteed high accuracy, thus location-independent and ideal for mobile applications which require verificationPNS models with external calibration functionCapacity display: A bar lights up to show how much of the weighing range is still availableAccurate counting: The automatic reference optimization gradually improves the average value of the part weightCompact dimensions, advantageous when space is limitedStainless steel weighing plateModels 600-3 and 600-3M have a large removable glass draft shield and a weighing chamber measuring (W x D x H) 172 x 171 x 160 mm.Large LCD display, digit height 16.5 mmPermissible ambient temperature range: 5 to 40 °C
Other accessories, such as sieve lids and intermediate receivers, are available on request.